To be more EABI compliant and as a preparation for building
with clang, use the platform-specific r9 register for gd
instead of r8.
note: The FIQ is not updated since it is not used in u-boot,
and under discussion for the time being.
The following checkpatch warning is ignored:
WARNING: Use of volatile is usually wrong: see
Documentation/volatile-considered-harmful.txt
cc: Albert ARIBAUD <albert.u.b...@aribaud.net>
Signed-off-by: Jeroen Hofstee <jer...@myspectrum.nl>
---
arch/arm/config.mk | 2 +-
arch/arm/include/asm/global_data.h | 2 +-
arch/arm/lib/crt0.S | 16 ++++++++--------
3 files changed, 10 insertions(+), 10 deletions(-)
diff --git a/arch/arm/config.mk b/arch/arm/config.mk
index 5e382ab..5f6e032 100644
--- a/arch/arm/config.mk
+++ b/arch/arm/config.mk
@@ -99,4 +99,4 @@ ifneq ($(CONFIG_SPL_BUILD),y)
ALL-y += checkarmreloc
endif
-OPTION_FIXED_GD=$(call cc-option, -ffixed-r8)
+OPTION_FIXED_GD=$(call cc-option, -ffixed-r9)
diff --git a/arch/arm/include/asm/global_data.h
b/arch/arm/include/asm/global_data.h
index 79a9597..e126436 100644
--- a/arch/arm/include/asm/global_data.h
+++ b/arch/arm/include/asm/global_data.h
@@ -47,6 +47,6 @@ struct arch_global_data {
#include <asm-generic/global_data.h>
-#define DECLARE_GLOBAL_DATA_PTR register volatile gd_t *gd asm ("r8")
+#define DECLARE_GLOBAL_DATA_PTR register volatile gd_t *gd asm ("r9")
#endif /* __ASM_GBL_DATA_H */
diff --git a/arch/arm/lib/crt0.S b/arch/arm/lib/crt0.S
index 960d12e..ac54b93 100644
--- a/arch/arm/lib/crt0.S
+++ b/arch/arm/lib/crt0.S
@@ -69,7 +69,7 @@ ENTRY(_main)
bic sp, sp, #7 /* 8-byte alignment for ABI compliance */
sub sp, #GD_SIZE /* allocate one GD above SP */
bic sp, sp, #7 /* 8-byte alignment for ABI compliance */
- mov r8, sp /* GD is above SP */
+ mov r9, sp /* GD is above SP */
mov r0, #0
bl board_init_f
@@ -81,15 +81,15 @@ ENTRY(_main)
* 'here' but relocated.
*/
- ldr sp, [r8, #GD_START_ADDR_SP] /* sp = gd->start_addr_sp */
+ ldr sp, [r9, #GD_START_ADDR_SP] /* sp = gd->start_addr_sp */
bic sp, sp, #7 /* 8-byte alignment for ABI compliance */
- ldr r8, [r8, #GD_BD] /* r8 = gd->bd */
- sub r8, r8, #GD_SIZE /* new GD is below bd */
+ ldr r9, [r9, #GD_BD] /* r9 = gd->bd */
+ sub r9, r9, #GD_SIZE /* new GD is below bd */
adr lr, here
- ldr r0, [r8, #GD_RELOC_OFF] /* r0 = gd->reloc_off */
+ ldr r0, [r9, #GD_RELOC_OFF] /* r0 = gd->reloc_off */
add lr, lr, r0
- ldr r0, [r8, #GD_RELOCADDR] /* r0 = gd->relocaddr */
+ ldr r0, [r9, #GD_RELOCADDR] /* r0 = gd->relocaddr */
b relocate_code
here:
@@ -111,8 +111,8 @@ clbss_l:cmp r0, r1 /* while not at end of
BSS */
bl red_led_on
/* call board_init_r(gd_t *id, ulong dest_addr) */
- mov r0, r8 /* gd_t */
- ldr r1, [r8, #GD_RELOCADDR] /* dest_addr */
+ mov r0, r9 /* gd_t */
+ ldr r1, [r9, #GD_RELOCADDR] /* dest_addr */
/* call board_init_r */
ldr pc, =board_init_r /* this is auto-relocated! */
--
1.8.1.2
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
