Hi, Any feedback for those patch series?
Best Regards, Josh Wu On 7/3/2013 11:11 AM, Josh Wu wrote:
In this patch series, first we make the nand driver can dynamic change sector size and ecc correct bits. Then we enable ONFI ecc parameters check. v2 --> v3: use dev_err/info(host->dev) instead of dev_err/info(NULL). use MTDDEBUG instead of pr_debug(). v1 --> v2: Fixes according to Scoot Wood's suggestion - add a new patch which make all driver can use dev_err, dev_info, dev_dbg. - replace all printk to dev_err or dev_info. - fix pmecc data allocate error handler. - fix the pmecc ecc requirement selection, should use <= instead of use <. Josh Wu (5): ARM: at91: atmel_nand: pmecc driver will select the galois table by sector size ARM: at91: sama5d3: remove unused definition about PMECC alpha table offset linux/compat.h: move dev_err, dev_info and dev_dbg from usb driver to compat.h mtd: atmel_nand: alloc memory instead of use static array for pmecc data ARM: at91: atmel_nand: add code to check the ONFI parameter ECC requirement arch/arm/include/asm/arch-at91/at91sam9x5.h | 6 + arch/arm/include/asm/arch-at91/sama5d3.h | 2 - doc/README.atmel_pmecc | 14 -- drivers/mtd/nand/atmel_nand.c | 197 +++++++++++++++++++++++++-- drivers/usb/musb-new/linux-compat.h | 16 --- include/configs/at91sam9x5ek.h | 1 - include/configs/sama5d3xek.h | 1 - include/linux/compat.h | 8 ++ 8 files changed, 201 insertions(+), 44 deletions(-)
_______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot