From: Arkadiusz Wlodarczyk <a.wlodarc...@samsung.com> This commit enables support for USB mass storage composite function. It defines platform code and enables it at config file.
Signed-off-by: Arkadiusz Wlodarczyk <a.wlodarc...@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.p...@samsung.com> Signed-off-by: Mateusz Zalega <m.zal...@samsung.com> Tested-by: Arkadiusz Wlodarczyk <a.wlodarc...@samsung.com> Tested-by: Mateusz Zalega <m.zal...@samsung.com> Cc: Minkyu Kang <mk7.k...@samsung.com> --- board/samsung/goni/goni.c | 76 +++++++++++++++++++++++++++++++++++++++++++++- include/configs/s5p_goni.h | 10 +++--- 2 files changed, 80 insertions(+), 6 deletions(-) diff --git a/board/samsung/goni/goni.c b/board/samsung/goni/goni.c index c605bf5..28fedb3 100644 --- a/board/samsung/goni/goni.c +++ b/board/samsung/goni/goni.c @@ -13,6 +13,9 @@ #include <usb/s3c_udc.h> #include <asm/arch/cpu.h> #include <power/max8998_pmic.h> +#include <usb.h> +#include <usb_mass_storage.h> + DECLARE_GLOBAL_DATA_PTR; static struct s5pc110_gpio *s5pc110_gpio; @@ -140,10 +143,81 @@ struct s3c_plat_otg_data s5pc110_otg_data = { .usb_phy_ctrl = S5PC110_USB_PHY_CONTROL, }; -void board_usb_init(void) +int board_usb_init(enum board_usb_init_type what_to_init) { debug("USB_udc_probe\n"); s3c_udc_probe(&s5pc110_otg_data); + return 0; +} + +#endif + +#ifdef CONFIG_USB_GADGET_MASS_STORAGE +static int ums_read_sector(struct ums_device *ums_dev, + ulong start, lbaint_t blkcnt, void *buf) +{ + if (ums_dev->mmc->block_dev.block_read(ums_dev->dev_num, + start + ums_dev->offset, + blkcnt, buf) != blkcnt) + return -1; + + return 0; +} + +static int ums_write_sector(struct ums_device *ums_dev, + ulong start, lbaint_t blkcnt, const void *buf) +{ + if (ums_dev->mmc->block_dev.block_write(ums_dev->dev_num, + start + ums_dev->offset, + blkcnt, buf) != blkcnt) + return -1; + + return 0; +} + +static void ums_get_capacity(struct ums_device *ums_dev, + long long int *capacity) +{ + long long int tmp_capacity; + + tmp_capacity = (long long int) ((ums_dev->offset + ums_dev->part_size) + * SECTOR_SIZE); + *capacity = ums_dev->mmc->capacity - tmp_capacity; +} + +static struct ums_board_info ums_board = { + .read_sector = ums_read_sector, + .write_sector = ums_write_sector, + .get_capacity = ums_get_capacity, + .name = "GONI UMS disk", + .ums_dev = { + .mmc = NULL, + .dev_num = 0, + .offset = 0, + .part_size = 0. + }, +}; + +struct ums_board_info *board_ums_init(unsigned int dev_num, unsigned int offset, + unsigned int part_size) +{ + struct mmc *mmc; + + mmc = find_mmc_device(dev_num); + /* + * mmc initialization is necessary prior to the ums command usage + * due to fact that on goni target environment is read from oneNand + * memory, so the mmc remains uninitialized when u-boot prompt appears + */ + if (!mmc || mmc_init(mmc)) + return NULL; + + ums_board.ums_dev.mmc = mmc; + ums_board.ums_dev.dev_num = dev_num; + ums_board.ums_dev.offset = offset; + ums_board.ums_dev.part_size = part_size; + + return &ums_board; } #endif diff --git a/include/configs/s5p_goni.h b/include/configs/s5p_goni.h index 192acaa..8014958 100644 --- a/include/configs/s5p_goni.h +++ b/include/configs/s5p_goni.h @@ -116,7 +116,7 @@ #define CONFIG_COMMON_BOOT "${console} ${meminfo} ${mtdparts}" #define CONFIG_BOOTARGS "root=/dev/mtdblock8 ubi.mtd=8 ubi.mtd=3 ubi.mtd=6" \ - " rootfstype=cramfs " CONFIG_COMMON_BOOT + " rootfstype=cramfs rootwait " CONFIG_COMMON_BOOT #define CONFIG_UPDATEB "updateb=onenand erase 0x0 0x100000;" \ " onenand write 0x32008000 0x0 0x100000\0" @@ -170,15 +170,13 @@ "mmcdev=0\0" \ "mmcbootpart=2\0" \ "mmcrootpart=5\0" \ - "mmcblk=/dev/mmcblk1p1\0" \ + "partitions=" PARTS_DEFAULT \ "bootblock=9\0" \ "ubiblock=8\0" \ "ubi=enabled\0" \ "opts=always_resume=1\0" \ - "dfu_alt_info=" CONFIG_DFU_ALT + "dfu_alt_info=" CONFIG_DFU_ALT "\0" - -/* Miscellaneous configurable options */ #define CONFIG_SYS_LONGHELP /* undef to save memory */ #define CONFIG_SYS_HUSH_PARSER /* use "hush" command parser */ #define CONFIG_SYS_PROMPT "Goni # " @@ -246,5 +244,7 @@ #define CONFIG_USB_GADGET_S3C_UDC_OTG #define CONFIG_USB_GADGET_DUALSPEED #define CONFIG_USB_GADGET_VBUS_DRAW 2 +#define CONFIG_CMD_USB_MASS_STORAGE +#define CONFIG_USB_GADGET_MASS_STORAGE #endif /* __CONFIG_H */ -- 1.8.2.1 _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot