Dear Troy Kisky,
> The hcor for i.MX6 is 02184340
> and the udc should be 02184140
>
> Signed-off-by: Troy Kisky <troy.ki...@boundarydevices.com>
>
> ---
> I don't know if this is a correct fix, please check carefully.
> ---
> drivers/usb/gadget/mv_udc.c | 28 +++++++++++++++++++---------
> 1 file changed, 19 insertions(+), 9 deletions(-)
>
> diff --git a/drivers/usb/gadget/mv_udc.c b/drivers/usb/gadget/mv_udc.c
> index 7574e31..359b8e1 100644
> --- a/drivers/usb/gadget/mv_udc.c
> +++ b/drivers/usb/gadget/mv_udc.c
> @@ -110,6 +110,16 @@ static struct mv_drv controller = {
> },
> };
>
> +struct mv_udc *get_mv_udc(void)
> +{
> +#ifdef CONFIG_MXC_USB_PORT
> + return (struct mv_udc *)((unsigned)controller.ctrl->hcor
> + - (0x200 * CONFIG_MXC_USB_PORT));
> +#else
> + return (struct mv_udc *)controller.ctrl->hcor;
> +#endif
> +}
> +
This in particular is something I wanted to avoid happening.
Can you instead call
usb_lowlevel_init(0, (void **)&controller.ctrl);
for different number than 0 in usb_gadget_register_driver() instead ? THe
effect
will be the same, yet the patch will be smaller.
Best regards,
Marek Vasut
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
