On Fri, Jul 12, 2013 at 1:06 AM, Marek Vasut <ma...@denx.de> wrote: > Dear Alexandre Pereira da Silva, > >> On Thu, Jul 11, 2013 at 5:36 PM, Marek Vasut <ma...@denx.de> wrote: >> > Dear Alexandre Pereira da Silva, >> > >> >> On Thu, Jul 11, 2013 at 4:55 PM, Marek Vasut <ma...@denx.de> wrote: >> > Make sure to check the direction too, it can go either from phy to fec or >> > the other way IIRC. >> >> Ok, it seems this was caused by a bad tftp server and not by the board >> itself. >> >> I can confirm KSZ8021 is functional, after defining CONFIG_PHYLIB to >> mx28evk.h > > OK, good to hear! Btw. the MX28EVK uses LAN8720 PHY, it is the M28EVK that > uses > the Micrel PHY. > > btw. I suspect you should really split away your platform into separate space > instead of hacking around various boards ;-)
Yes, I will do that, but the first priority was to get it working :-) Thanks for your help solving this issue. _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot