Hello, I have problems with a lan9303 switch on an am335x based board, which does not support 1000FD/HD modes, but as it set BMSR_ERCAP bit in BMSR and returns 0xffff for reads on the MII_STAT1000 and MII_CTRL1000 registers, u-boot code detects SPEED_1000 in drivers/net/phy/phy.c genphy_parse_link() ... which is wrong, as this switch does not support 1000 modes ...
I found in ./common/miiphyutil.c miiphy_speed() the define CONFIG_PHY_GIGE which it seems lacks in drivers/net/phy/phy.c genphy_parse_link() ? Or is there another option? bye, Heiko -- DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
