Hi Dan,
On Tuesday 09 July 2013 02:29 AM, Dan Murphy wrote:
> From: "Govindraj.R" <govindraj.r...@ti.com>
>
> * Enable all usb ehci related clocks.
> * Add ehci support to omap5 board file and arch specific
> sysc reg mask values.
> * Enable config options for usb support and ethernet support
>
> Signed-off-by: Govindraj.R <govindraj.r...@ti.com>
> ---
> arch/arm/cpu/armv7/omap5/clocks.c | 20 +++++++++++---
> arch/arm/include/asm/arch-omap5/clocks.h | 6 ++++
> arch/arm/include/asm/arch-omap5/ehci.h | 44
> ++++++++++++++++++++++++++++++
> board/ti/omap5_evm/evm.c | 33 ++++++++++++++++++++++
> include/configs/omap5_evm5430.h | 23 ++++++++++++++--
> 5 files changed, 120 insertions(+), 6 deletions(-)
> create mode 100644 arch/arm/include/asm/arch-omap5/ehci.h
Is this based on current mainline?
Most of the above files changed are not preset in mainline.
>
> diff --git a/arch/arm/cpu/armv7/omap5/clocks.c
> b/arch/arm/cpu/armv7/omap5/clocks.c
> index 7e69d2b..f914b60 100644
> --- a/arch/arm/cpu/armv7/omap5/clocks.c
> +++ b/arch/arm/cpu/armv7/omap5/clocks.c
> @@ -375,6 +375,8 @@ void enable_basic_clocks(void)
> &prcm->cm_l4per_gpio4_clkctrl,
> &prcm->cm_l4per_gpio5_clkctrl,
> &prcm->cm_l4per_gpio6_clkctrl,
> + &prcm->cm_clksel_usb_60mhz,
> + &prcm->cm_l3init_hsusbtll_clkctrl,
> 0
> };
>
> @@ -385,6 +387,7 @@ void enable_basic_clocks(void)
> &prcm->cm_wkup_wdtimer2_clkctrl,
> &prcm->cm_l4per_uart3_clkctrl,
> &prcm->cm_l4per_i2c1_clkctrl,
> + &prcm->cm_l3init_hsusbhost_clkctrl,
> 0
> };
>
> @@ -408,10 +411,13 @@ void enable_basic_clocks(void)
> setbits_le32(&prcm->cm_wkup_gptimer1_clkctrl,
> GPTIMER1_CLKCTRL_CLKSEL_MASK);
>
> - do_enable_clocks(clk_domains_essential,
> - clk_modules_hw_auto_essential,
> - clk_modules_explicit_en_essential,
> - 1);
> + /* Enbale all 3 usb ports enable uhh, utmi and hsic clocks*/
> + setbits_le32(&prcm->cm_l3init_hsusbhost_clkctrl,
> + USB_HOST_HS_CLKCTRL_MASK);
> +
> + /* Enbale all 3 usb host ports tll clocks*/
> + setbits_le32(&prcm->cm_l3init_hsusbtll_clkctrl,
> + USB_TLL_HS_CLKCTRL_MASK);
Please keep this under a CONFIG_*_USB_* macro.
Thanks,
Lokesh
>
> /* Select 384Mhz for GPU as its the POR for ES1.0 */
> setbits_le32(&prcm->cm_sgx_sgx_clkctrl,
> @@ -429,6 +435,12 @@ void enable_basic_clocks(void)
> setbits_le32(&prcm->cm_coreaon_bandgap_clkctrl,
> ((OMAP_TS_CLK_ENABLE_MASK | OMAP_19M_TS_CLK_DIVIDER_MASK)
> & ~OMAP_38M_TS_CLK_DIVIDER_MASK));
> +
> + do_enable_clocks(clk_domains_essential,
> + clk_modules_hw_auto_essential,
> + clk_modules_explicit_en_essential,
> + 1);
> +
> }
>
> void enable_basic_uboot_clocks(void)
> diff --git a/arch/arm/include/asm/arch-omap5/clocks.h
> b/arch/arm/include/asm/arch-omap5/clocks.h
> index c944f35..43fc5b8 100644
> --- a/arch/arm/include/asm/arch-omap5/clocks.h
> +++ b/arch/arm/include/asm/arch-omap5/clocks.h
> @@ -613,6 +613,12 @@ struct omap5_prcm_regs {
> /* CM_L3INIT_USBPHY_CLKCTRL */
> #define USBPHY_CLKCTRL_OPTFCLKEN_PHY_48M_MASK 8
>
> +/* CM_L3INIT_USB_HOST_HS_CLKCTRL */
> +#define USB_HOST_HS_CLKCTRL_MASK 0xFFC0
> +
> +/* CM_L3INIT_USB_TLL_HS_CLKCTRL */
> +#define USB_TLL_HS_CLKCTRL_MASK 0x700
> +
> /* CM_MPU_MPU_CLKCTRL */
> #define MPU_CLKCTRL_CLKSEL_EMIF_DIV_MODE_SHIFT 24
> #define MPU_CLKCTRL_CLKSEL_EMIF_DIV_MODE_MASK (1 << 24)
> diff --git a/arch/arm/include/asm/arch-omap5/ehci.h
> b/arch/arm/include/asm/arch-omap5/ehci.h
> new file mode 100644
> index 0000000..49197f2
> --- /dev/null
> +++ b/arch/arm/include/asm/arch-omap5/ehci.h
> @@ -0,0 +1,44 @@
> +/*
> + * OMAP EHCI port support
> + * Based on LINUX KERNEL
> + * drivers/usb/host/ehci-omap.c and drivers/mfd/omap-usb-host.c
> + *
> + * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com*
> + * Author: Govindraj R <govindraj.r...@ti.com>
> + *
> + * This program is free software: you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 of
> + * the License as published by the Free Software Foundation.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + *
> + * You should have received a copy of the GNU General Public License
> + * along with this program. If not, see <http://www.gnu.org/licenses/>.
> + */
> +
> +#ifndef _EHCI_H
> +#define _EHCI_H
> +
> +#define OMAP_EHCI_BASE (OMAP54XX_L4_CORE_BASE
> + 0x64C00)
> +#define OMAP_UHH_BASE (OMAP54XX_L4_CORE_BASE
> + 0x64000)
> +#define OMAP_USBTLL_BASE (OMAP54XX_L4_CORE_BASE +
> 0x62000)
> +
> +/* TLL Register Set */
> +#define OMAP_USBTLL_SYSCONFIG_SIDLEMODE (1 << 3)
> +#define OMAP_USBTLL_SYSCONFIG_ENAWAKEUP (1 << 2)
> +#define OMAP_USBTLL_SYSCONFIG_SOFTRESET (1 << 1)
> +#define OMAP_USBTLL_SYSCONFIG_CACTIVITY (1 << 8)
> +#define OMAP_USBTLL_SYSSTATUS_RESETDONE 1
> +
> +#define OMAP_UHH_SYSCONFIG_SOFTRESET 1
> +#define OMAP_UHH_SYSSTATUS_EHCI_RESETDONE (1 << 2)
> +#define OMAP_UHH_SYSCONFIG_NOIDLE (1 << 2)
> +#define OMAP_UHH_SYSCONFIG_NOSTDBY (1 << 4)
> +
> +#define OMAP_UHH_SYSCONFIG_VAL (OMAP_UHH_SYSCONFIG_NOIDLE | \
> + OMAP_UHH_SYSCONFIG_NOSTDBY)
> +
> +#endif /* _EHCI_H */
> diff --git a/board/ti/omap5_evm/evm.c b/board/ti/omap5_evm/evm.c
> index 7b426d9..30fcd95 100644
> --- a/board/ti/omap5_evm/evm.c
> +++ b/board/ti/omap5_evm/evm.c
> @@ -29,6 +29,12 @@
>
> #include "mux_data.h"
>
> +#ifdef CONFIG_USB_EHCI
> +#include <usb.h>
> +#include <asm/arch/ehci.h>
> +#include <asm/ehci-omap.h>
> +#endif
> +
> DECLARE_GLOBAL_DATA_PTR;
>
> const struct omap_sysinfo sysinfo = {
> @@ -107,3 +113,30 @@ int board_mmc_init(bd_t *bis)
> }
> #endif
> #endif
> +
> +#ifdef CONFIG_USB_EHCI
> +static struct omap_usbhs_board_data usbhs_bdata = {
> + .port_mode[0] = OMAP_USBHS_PORT_MODE_UNUSED,
> + .port_mode[1] = OMAP_EHCI_PORT_MODE_HSIC,
> + .port_mode[2] = OMAP_EHCI_PORT_MODE_HSIC,
> +};
> +
> +int ehci_hcd_init(void)
> +{
> + int ret;
> +
> + ret = omap_ehci_hcd_init(&usbhs_bdata);
> + if (ret < 0)
> + return ret;
> +
> + return 0;
> +}
> +
> +int ehci_hcd_stop(void)
> +{
> + int ret;
> +
> + ret = omap_ehci_hcd_stop();
> + return ret;
> +}
> +#endif
> diff --git a/include/configs/omap5_evm5430.h b/include/configs/omap5_evm5430.h
> index 3145e53..e81c560 100644
> --- a/include/configs/omap5_evm5430.h
> +++ b/include/configs/omap5_evm5430.h
> @@ -128,6 +128,27 @@
> /* Flash */
> #define CONFIG_SYS_NO_FLASH 1
>
> +/* USB UHH support options */
> +#define CONFIG_CMD_USB
> +#define CONFIG_USB_HOST
> +#define CONFIG_USB_EHCI
> +#define CONFIG_USB_EHCI_OMAP
> +#define CONFIG_USB_STORAGE
> +#define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS 3
> +
> +#define CONFIG_OMAP_EHCI_PHY1_RESET_GPIO 172
> +#define CONFIG_OMAP_EHCI_PHY2_RESET_GPIO 173
> +
> +/* Enabled commands */
> +#define CONFIG_NET_MULTI
> +#define CONFIG_CMD_DHCP /* DHCP Support */
> +#define CONFIG_CMD_NET /* bootp, tftpboot, rarpboot */
> +#define CONFIG_CMD_NFS /* NFS support */
> +
> +/* USB Networking options */
> +#define CONFIG_USB_HOST_ETHER
> +#define CONFIG_USB_ETHER_SMSC95XX
> +
> /* commands to include */
> #include <config_cmd_default.h>
>
> @@ -139,8 +160,6 @@
> #define CONFIG_CMD_SAVEENV
>
> /* Disabled commands */
> -#undef CONFIG_CMD_NET
> -#undef CONFIG_CMD_NFS
> #undef CONFIG_CMD_FPGA /* FPGA configuration Support */
> #undef CONFIG_CMD_IMLS /* List all found images */
>
>
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
