Fill the right command type when using CMD12 to stop data transfer.
Signed-off-by: Haijun Zhang <haijun.zh...@freescale.com>
CC: Fleming Andrew-AFLEMING <aflem...@freescale.com>
CC: Scott Wood <scottw...@freescale.com>
---
drivers/mmc/fsl_esdhc.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/mmc/fsl_esdhc.c b/drivers/mmc/fsl_esdhc.c
index e93e38a..09bb1be 100644
--- a/drivers/mmc/fsl_esdhc.c
+++ b/drivers/mmc/fsl_esdhc.c
@@ -100,7 +100,7 @@ static uint esdhc_xfertyp(struct mmc_cmd *cmd, struct
mmc_data *data)
else if (cmd->resp_type & MMC_RSP_PRESENT)
xfertyp |= XFERTYP_RSPTYP_48;
-#ifdef CONFIG_MX53
+#if defined(CONFIG_MX53) || defined(CONFIG_T4240QDS)
if (cmd->cmdidx == MMC_CMD_STOP_TRANSMISSION)
xfertyp |= XFERTYP_CMDTYP_ABORT;
#endif
--
1.8.0
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
