For the first eMMC read of data for upload, use the "large" dfu_buf (now
configurable) instead of usb request buffer allocated at composite layer
(which is 4KiB) [*].
For eMMC the whole file is read, which usually is larger than the buffer [*]
provided with usb request.
Signed-off-by: Lukasz Majewski <l.majew...@samsung.com>
Cc: Tom Rini <tr...@ti.com>
Cc: Pantelis Antoniou <pa...@antoniou-consulting.com>
Cc: Marek Vasut <ma...@denx.de>
Cc: Heiko Schocher <h...@denx.de>
---
drivers/dfu/dfu.c | 9 +++++----
1 file changed, 5 insertions(+), 4 deletions(-)
diff --git a/drivers/dfu/dfu.c b/drivers/dfu/dfu.c
index e429d74..0521752 100644
--- a/drivers/dfu/dfu.c
+++ b/drivers/dfu/dfu.c
@@ -248,7 +248,11 @@ int dfu_read(struct dfu_entity *dfu, void *buf, int size,
int blk_seq_num)
__func__, dfu->name, buf, size, blk_seq_num, dfu->i_buf);
if (!dfu->inited) {
- ret = dfu->read_medium(dfu, 0, buf, &dfu->r_left);
+ dfu->i_buf_start = dfu_get_buf();
+ if (dfu->i_buf_start == NULL)
+ return -ENOMEM;
+
+ ret = dfu->read_medium(dfu, 0, dfu->i_buf_start, &dfu->r_left);
if (ret != 0) {
debug("%s: failed to get r_left\n", __func__);
return ret;
@@ -259,9 +263,6 @@ int dfu_read(struct dfu_entity *dfu, void *buf, int size,
int blk_seq_num)
dfu->i_blk_seq_num = 0;
dfu->crc = 0;
dfu->offset = 0;
- dfu->i_buf_start = dfu_get_buf();
- if (dfu->i_buf_start == NULL)
- return -ENOMEM;
dfu->i_buf_end = dfu_get_buf() + dfu_buf_size;
dfu->i_buf = dfu->i_buf_start;
dfu->b_left = 0;
--
1.7.10.4
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
