Hi Stefan, On Tue, 25 Jun 2013 09:14:12 +0200, Stefan Roese <s...@denx.de> wrote:
> Fix a problem with a re-assignment of r8 in the SPL version. > > This patch now moves the call to s_init() to a later stage, right before > calling board_init_f(). And makes sure that r8 is correctly initialized > before s_init() is called. r8 now is only written in crt0.S. > > This error was detected on the SPL port for the Compulab CM-T35 board > (OMAP3530). > > Signed-off-by: Stefan Roese <s...@denx.de> > Cc: Tom Rini <tr...@ti.com> > Cc: Albert ARIBAUD <albert.u.b...@aribaud.net> > --- > Albert, I'm not really happy with this patch as it evolves now. As you > will see, I had to make some further additions to crt0.S to fix a > problem for non-SPL builds and to fix compilation errors for non-OMAP > platforms. This gets quite ugly now. Looking back at my patch v1, this > looks much less intrusive. > > What do you think? I said the first patch was NAK, and the reasons I NAKed it remain. However, there might be another solution: instead of squeezing the call to s_init() in crt0.S right between the initial environment setting and the call to board_init_f(), we could simply move the s_init() call inside board_init_f(). >From a running conditions perspective, the only change would be that s_init() is going to run from a non-empty stack, but we know that there is free stack enough during board_init_f() to call functions. Moving the call to s_init() into board_init_f() removes any changes to crt0.S, which were my essential NAK reason and saves you some ugliness. I would even hazard that you could place s_init in init_sequence[], for instance as a first entry to be called (before arch_cpu_init). After all, the only difference in execution is that gdata is going to be initialized properly before s_init() kicks in. Also, a name change would be in order, because s_init() as a private OMAP function is ok, but as an init function invoked from board_init_f() it needs a more meaningful name. Amicalement, -- Albert. _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot