> -----Original Message----- > From: Otavio Salvador [mailto:otavio.salva...@gmail.com] On Behalf Of > Otavio Salvador > Sent: Thursday, June 27, 2013 2:31 AM > To: U-Boot Mailing List > Cc: Otavio Salvador; Stefano Babic; Estevam Fabio-R49496; Wang Huan- > B18965; Andy Voltz > Subject: [PATCH v3 1/2] vf610twr: Add default environment in line with > other Freescale boards > > This adds a default environment which should be able to support both > 3.0.15 from Timesys and upcoming 3.11. > > Signed-off-by: Otavio Salvador <ota...@ossystems.com.br> > --- > Changes in v3: > - add dt boot support > - use ttyLP1 as console > - change loadaddr and sys text as iMX6SL > - NOTE: It needs to be boot tested as I don't have the board > > Changes in v2: > - fix console for ttymxc1 (Fabio) > > include/configs/vf610twr.h | 93 > ++++++++++++++++++++++++++++++++++++++++++++-- > 1 file changed, 90 insertions(+), 3 deletions(-) > > diff --git a/include/configs/vf610twr.h b/include/configs/vf610twr.h > index 77fe893..94c69a6 100644 > --- a/include/configs/vf610twr.h > +++ b/include/configs/vf610twr.h > @@ -83,7 +83,95 @@ > > #define CONFIG_BOOTDELAY 3 > > -#define CONFIG_SYS_TEXT_BASE 0x3f008000 > +#define CONFIG_LOADADDR 0x82000000 > +#define CONFIG_SYS_TEXT_BASE 0x87800000 [Alison Wang] Why do you change loadaddr and sys text base? After you change the sys text base, the u-boot could not work. The original sys text base is SRAM address, you change it to DDR address. Here we should use SRAM address. > + > +#define CONFIG_EXTRA_ENV_SETTINGS \ > + "script=boot.scr\0" \ > + "uimage=uImage\0" \ > + "console=ttyLP1\0" \ > + "fdt_high=0xffffffff\0" \ > + "initrd_high=0xffffffff\0" \ > + "fdt_file=vf610-twr.dtb\0" \ > + "fdt_addr=0x81000000\0" \ > + "boot_fdt=try\0" \ > + "ip_dyn=yes\0" \ > + "mmcdev=" __stringify(CONFIG_SYS_MMC_ENV_DEV) "\0" \ > + "mmcpart=1\0" \ > + "mmcroot=/dev/mmcblk0p2 rootwait rw\0" \ > + "update_sd_firmware_filename=u-boot.imx\0" \ > + "update_sd_firmware=" \ > + "if test ${ip_dyn} = yes; then " \ > + "setenv get_cmd dhcp; " \ > + "else " \ > + "setenv get_cmd tftp; " \ > + "fi; " \ > + "if mmc dev ${mmcdev}; then " \ > + "if ${get_cmd} ${update_sd_firmware_filename}; then " > \ > + "setexpr fw_sz ${filesize} / 0x200; " \ > + "setexpr fw_sz ${fw_sz} + 1; " \ > + "mmc write ${loadaddr} 0x2 ${fw_sz}; " \ > + "fi; " \ > + "fi\0" \ > + "mmcargs=setenv bootargs console=${console},${baudrate} " \ > + "root=${mmcroot}\0" \ > + "loadbootscript=" \ > + "fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" > \ > + "bootscript=echo Running bootscript from mmc ...; " \ > + "source\0" \ > + "loaduimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} > ${uimage}\0" \ > + "loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} > ${fdt_file}\0" \ > + "mmcboot=echo Booting from mmc ...; " \ > + "run mmcargs; " \ > + "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then > " \ > + "if run loadfdt; then " \ > + "bootm ${loadaddr} - ${fdt_addr}; " \ > + "else " \ > + "if test ${boot_fdt} = try; then " \ > + "bootm; " \ > + "else " \ > + "echo WARN: Cannot load the DT; " \ > + "fi; " \ > + "fi; " \ > + "else " \ > + "bootm; " \ > + "fi;\0" \ > + "netargs=setenv bootargs console=${console},${baudrate} " \ > + "root=/dev/nfs " \ > + "ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \ > + "netboot=echo Booting from net ...; " \ > + "run netargs; " \ > + "if test ${ip_dyn} = yes; then " \ > + "setenv get_cmd dhcp; " \ > + "else " \ > + "setenv get_cmd tftp; " \ > + "fi; " \ > + "${get_cmd} ${uimage}; " \ > + "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then > " \ > + "if ${get_cmd} ${fdt_addr} ${fdt_file}; then " \ > + "bootm ${loadaddr} - ${fdt_addr}; " \ > + "else " \ > + "if test ${boot_fdt} = try; then " \ > + "bootm; " \ > + "else " \ > + "echo WARN: Cannot load the DT; " \ > + "fi; " \ > + "fi; " \ > + "else " \ > + "bootm; " \ > + "fi;\0" > + > +#define CONFIG_BOOTCOMMAND \ > + "mmc dev ${mmcdev}; if mmc rescan; then " \ > + "if run loadbootscript; then " \ > + "run bootscript; " \ > + "else " \ > + "if run loaduimage; then " \ > + "run mmcboot; " \ > + "else run netboot; " \ > + "fi; " \ > + "fi; " \ > + "else run netboot; fi" > > /* Miscellaneous configurable options */ > #define CONFIG_SYS_LONGHELP /* undef to save memory */ > @@ -101,8 +189,7 @@ > #define CONFIG_SYS_MEMTEST_START 0x80010000 > #define CONFIG_SYS_MEMTEST_END 0x87C00000 > > -#define CONFIG_SYS_LOAD_ADDR 0x80010000 > - > +#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR > #define CONFIG_SYS_HZ 1000 > > /* > -- > 1.8.3.1 >
_______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
