On Wed, Jun 26, 2013 at 2:16 PM, Fabio Estevam <feste...@gmail.com> wrote: > On Wed, Jun 26, 2013 at 2:12 PM, Otavio Salvador > <ota...@ossystems.com.br> wrote: > >> + "console=ttymxc1\0" \ > > Vybrid does not use the same serial driver as i.MX. > > In the kernel the serial driver is this one: > https://git.kernel.org/cgit/linux/kernel/git/gregkh/tty.git/tree/drivers/tty/serial/fsl_lpuart.c?h=tty-next > > ,and the driver name is "ttyLP". > > Vybrid starts numbering the UART ports from 0, so the device number in > Linux matches the hardware port number. > > This means that the correct is "console=ttyLP1" for this board to boot > a mainline kernel.
This is being done using Timesys kernel as reference; so I did used his kernel as reference. This is the kernel which has been send for inclusion in Yocto BSP so I think I will stay with it for now. -- Otavio Salvador O.S. Systems http://www.ossystems.com.br http://projetos.ossystems.com.br Mobile: +55 (53) 9981-7854 Mobile: +1 (347) 903-9750 _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
