Hello Lokesh,
Am 25.06.2013 05:48, schrieb Lokesh Vutla:
> Hi Heiko,
> On Tuesday 25 June 2013 12:42 AM, Heiko Schocher wrote:
>> Hello Lokesh,
>>
>> Am 24.06.2013 15:15, schrieb Lokesh Vutla:
>>> Locking sequence for all the dplls is same.
>>> In the current code same sequence is done repeatedly
>>> for each dpll. Instead have a generic function
>>> for locking dplls and pass dpll data to that function.
>>>
>>> This is derived from OMAP4 boards.
>>>
>>> Signed-off-by: Lokesh Vutla <lokeshvu...@ti.com>
>>> ---
>>> arch/arm/cpu/armv7/am33xx/Makefile | 1 +
>>> arch/arm/cpu/armv7/am33xx/clock.c | 116 ++++++++++++++
>>> arch/arm/cpu/armv7/am33xx/clock_am33xx.c | 222
>>> +++++---------------------
>>> arch/arm/cpu/armv7/am33xx/emif4.c | 4 +
>>> arch/arm/include/asm/arch-am33xx/clock.h | 68 ++++++++
>>> arch/arm/include/asm/arch-am33xx/ddr_defs.h | 2 +
>>> arch/arm/include/asm/arch-am33xx/sys_proto.h | 1 +
>>> 7 files changed, 232 insertions(+), 182 deletions(-)
>>> create mode 100644 arch/arm/cpu/armv7/am33xx/clock.c
>>>
>> [...]
>>> diff --git a/arch/arm/cpu/armv7/am33xx/clock.c
>>> b/arch/arm/cpu/armv7/am33xx/clock.c
>>> new file mode 100644
>>> index 0000000..a7f1d83
>>> --- /dev/null
>>> +++ b/arch/arm/cpu/armv7/am33xx/clock.c
>>> @@ -0,0 +1,116 @@
>> [...]
>>> +static void do_setup_dpll(const struct dpll_regs *dpll_regs,
>>> + const struct dpll_params *params)
>>> +{
>>
>> Could we have this function not only static? I posted a patch:
>>
>> [U-Boot] arm, am335x: make mpu pll config configurable
>> http://patchwork.ozlabs.org/patch/248509/
>>
>> which uses mpu_pll_config() for switching mpu pll clock
>> from board code ... you delete this function later in this patch,
>> so I think, I can switch to do_setup_pll() ... if this is not
>> static code ...
> Yes I saw that patch. No need to make this non-static.
> Please have your own struct "const struct dpll_params dpll_mpu"
> and update your values accordingly.
Hmm.. maybe I miss something here. You call setup_dplls()
in arch/arm/cpu/armv7/am33xx/clock.c using &dpll_mpu defined
in arch/arm/cpu/armv7/am33xx/clock_am33xx.c ... so how to
make here a board specific struct?
The MPUCLK is configurable through the define CONFIG_SYS_MPUCLK
which is good, but I have on this board a PMIC, which in board SPL
code change MPU and core voltage ... and after that I change
the MPU clock again ...
bye,
Heiko
--
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
