before writing the received buffer to nand, erase the nand sectors. If not doing this, nand write fails. See for more info here:
http://lists.denx.de/pipermail/u-boot/2013-June/156361.html Using the nand erase option "spread", maybe overwrite blocks on, for example another mtd partition, if the erasing range contains bad blocks. So a limit option is added to nand_erase_opts() Signed-off-by: Heiko Schocher <h...@denx.de> Cc: Scott Wood <scottw...@freescale.com> Cc: Pantelis Antoniou <pa...@antoniou-consulting.com> Cc: Lukasz Majewski <l.majew...@samsung.com> Cc: Kyungmin Park <kyungmin.p...@samsung.com> Cc: Marek Vasut <ma...@denx.de> Cc: Tom Rini <tr...@ti.com> --- - changes for v2: - use opts.spread as Scott Wood suggested - changes for v3: - add opts.lim as Scott Wood suggested - changes for v4: - fix boundary check as Scott Wood mentioned drivers/dfu/dfu_nand.c | 18 ++++++++++++++++-- drivers/mtd/nand/nand_util.c | 4 ++++ include/nand.h | 2 ++ 3 Dateien geändert, 22 Zeilen hinzugefügt(+), 2 Zeilen entfernt(-) diff --git a/drivers/dfu/dfu_nand.c b/drivers/dfu/dfu_nand.c index 7dc89b2..07dee89 100644 --- a/drivers/dfu/dfu_nand.c +++ b/drivers/dfu/dfu_nand.c @@ -63,12 +63,26 @@ static int nand_block_op(enum dfu_nand_op op, struct dfu_entity *dfu, nand = &nand_info[nand_curr_device]; - if (op == DFU_OP_READ) + if (op == DFU_OP_READ) { ret = nand_read_skip_bad(nand, start, &count, &actual, lim, buf); - else + } else { + nand_erase_options_t opts; + + memset(&opts, 0, sizeof(opts)); + opts.offset = start; + opts.length = count; + opts.spread = 1; + opts.quiet = 1; + opts.lim = lim; + /* first erase */ + ret = nand_erase_opts(nand, &opts); + if (ret) + return ret; + /* then write */ ret = nand_write_skip_bad(nand, start, &count, &actual, lim, buf, 0); + } if (ret != 0) { printf("%s: nand_%s_skip_bad call failed at %llx!\n", diff --git a/drivers/mtd/nand/nand_util.c b/drivers/mtd/nand/nand_util.c index d81972c..1d22b52 100644 --- a/drivers/mtd/nand/nand_util.c +++ b/drivers/mtd/nand/nand_util.c @@ -120,6 +120,10 @@ int nand_erase_opts(nand_info_t *meminfo, const nand_erase_options_t *opts) WATCHDOG_RESET(); + if (opts->lim && (erase.addr >= (opts->offset + opts->lim))) { + puts("Size of erase exceeds limit\n"); + return -EFBIG; + } if (!opts->scrub && bbtest) { int ret = mtd_block_isbad(meminfo, erase.addr); if (ret > 0) { diff --git a/include/nand.h b/include/nand.h index 26190e4..228d871 100644 --- a/include/nand.h +++ b/include/nand.h @@ -125,6 +125,8 @@ struct nand_erase_options { /* Don't include skipped bad blocks in size to be erased */ int spread; + /* maximum size that actual may be in order to not exceed the buf */ + loff_t lim; }; typedef struct nand_erase_options nand_erase_options_t; -- 1.7.11.7 _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
