Hi Axel,
On 21/06/13 10:13, Axel Lin wrote:
> 2013/6/21 Lubomir Popov <lpo...@mm-sol.com>:
>> Hi Axel,
>>
>> On 21/06/13 06:07, Axel Lin wrote:
>>> AM33XX has 4 gpio banks, thus the valid gpio range should be 0 ... 127.
>>>
>>> Signed-off-by: Axel Lin <axel....@ingics.com>
>>> ---
>>> v2: define OMAP_MAX_GPIO and use it.
>>> This change is mainly based on Stefan's comment, however I use
>>> OMAP_MAX_GPIO instead of CONFIG_OMAP_MAX_GPIO because having CONFIG_ prefix
>>> seems meaning it can be configurable in configs.
>>>
>>> drivers/gpio/omap_gpio.c | 8 +++++++-
>>> 1 file changed, 7 insertions(+), 1 deletion(-)
>>>
>>> diff --git a/drivers/gpio/omap_gpio.c b/drivers/gpio/omap_gpio.c
>>> index a30d7f0..6fa57c9 100644
>>> --- a/drivers/gpio/omap_gpio.c
>>> +++ b/drivers/gpio/omap_gpio.c
>>> @@ -40,6 +40,12 @@
>>> #include <asm/io.h>
>>> #include <asm/errno.h>
>>>
>>> +#if defined(CONFIG_AM33XX)
>>> +#define OMAP_MAX_GPIO 128
>>> +#else
>>> +#define OMAP_MAX_GPIO 192
>>> +#endif
>>
>> Please be aware that OMAP54XX and DRA7XX SoCs have 8 banks per 32 GPIOs,
>> that is, 256 in total. The DRA7xx config defines CONFIG_DRA7XX, but also
>> includes omap5_common.h, where CONFIG_OMAP54XX is defined (due to sharing
>> of many internal IPs with the OMAP5, including GPIO). The above definitions
>> should be changed to something like:
>>
>> #if defined(CONFIG_OMAP54XX)
>> #define OMAP_MAX_GPIO 256 /* OMAP54XX and DRA7XX */
>
> In arch/arm/cpu/armv7/omap5/hwinit.c
> we have below settings:
>
> static struct gpio_bank gpio_bank_54xx[6] = {
> { (void *)OMAP54XX_GPIO1_BASE, METHOD_GPIO_24XX },
> { (void *)OMAP54XX_GPIO2_BASE, METHOD_GPIO_24XX },
> { (void *)OMAP54XX_GPIO3_BASE, METHOD_GPIO_24XX },
> { (void *)OMAP54XX_GPIO4_BASE, METHOD_GPIO_24XX },
> { (void *)OMAP54XX_GPIO5_BASE, METHOD_GPIO_24XX },
> { (void *)OMAP54XX_GPIO6_BASE, METHOD_GPIO_24XX },
> };
>
> const struct gpio_bank *const omap_gpio_bank = gpio_bank_54xx;
>
> So gpio_bank_54xx only has 6 entries rather than 8 entries.
> Seems need to fix this before setting OMAP_MAX_GPIO to 256.
Sure. File arch/arm/include/asm/arch-omap5/gpio.h shall need
fixing as well, by adding:
#define OMAP54XX_GPIO7_BASE 0x48051000
#define OMAP54XX_GPIO8_BASE 0x48053000
>
> I'm wondering if it's ok to have this patch as is, and then an incremental
> patch to set gpio_bank_54xx[] and OMAP_MAX_GPIO for
> OMAP54XX and DRA7XX.
Feel free to proceed as you wish. If you modify hwint.c and gpio.h, then
the three patches could be combined in a series, e.g. "Fix valid GPIO
range for OMAP".
Tom?
>
> Regards,
> Axel
>
Thanks,
Lubo
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
