Depends on:
18d1c87ebe2a6a05905ae1cdd7a31abe6b5ee39d
b38050121cd3fea821a048661cdad5bf71f3a2b8
Signed-off-by: Robert Winkler <robert.wink...@boundarydevices.com>
---
board/boundary/nitrogen6x/nitrogen6x.c | 21 +++++++++++++++++++++
include/configs/nitrogen6x.h | 10 +++++++++-
2 files changed, 30 insertions(+), 1 deletion(-)
diff --git a/board/boundary/nitrogen6x/nitrogen6x.c
b/board/boundary/nitrogen6x/nitrogen6x.c
index 8f0f9b8..7096029 100644
--- a/board/boundary/nitrogen6x/nitrogen6x.c
+++ b/board/boundary/nitrogen6x/nitrogen6x.c
@@ -388,6 +388,27 @@ int board_eth_init(bd_t *bis)
return 0;
}
+int splash_screen_prepare(void)
+{
+ char *env_loadsplash;
+
+ if (!getenv("splashimage") || !getenv("splashsize"))
+ return 1;
+
+ env_loadsplash = getenv("loadsplash");
+ if (!env_loadsplash) {
+ printf("Environment variable loadsplash not found!\n");
+ return 1;
+ }
+
+ if (run_command_list(env_loadsplash, -1, 0)) {
+ printf("Failed to run loadsplash %s\n\n", env_loadsplash);
+ return 1;
+ }
+ printf("leaving splash_screen_prepare\n");
+ return 0;
+}
+
static void setup_buttons(void)
{
imx_iomux_v3_setup_multiple_pads(button_pads,
diff --git a/include/configs/nitrogen6x.h b/include/configs/nitrogen6x.h
index aea91bc..3cd850d 100644
--- a/include/configs/nitrogen6x.h
+++ b/include/configs/nitrogen6x.h
@@ -38,7 +38,7 @@
#define CONFIG_REVISION_TAG
/* Size of malloc() pool */
-#define CONFIG_SYS_MALLOC_LEN (10 * 1024 * 1024)
+#define CONFIG_SYS_MALLOC_LEN (15 * 1024 * 1024)
#define CONFIG_BOARD_EARLY_INIT_F
#define CONFIG_MISC_INIT_R
@@ -149,6 +149,13 @@
#define CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE
#define CONFIG_VIDEO_BMP_RLE8
#define CONFIG_SPLASH_SCREEN
+#define CONFIG_SPLASH_SCREEN_ALIGN
+
+#define CONFIG_VIDEO_BMP_GZIP
+#ifdef CONFIG_VIDEO_BMP_GZIP
+#define CONFIG_SYS_VIDEO_LOGO_MAX_SIZE (6 * 1024 * 1024)
+#endif
+
#define CONFIG_BMP_16BPP
#define CONFIG_VIDEO_LOGO
#define CONFIG_IPUV3_CLK 260000000
@@ -208,6 +215,8 @@
"echo ; echo serial console at 115200, 8N1 ; echo ; " \
"echo details at http://boundarydevices.com/6q_bootscript ; " \
"setenv stdout serial\0" \
+ "loadsplash=if sf probe ; then " \
+ "sf read ${splashimage} c2000 ${splashsize} ; fi\0" \
"upgradeu=for dtype in " CONFIG_DRIVE_TYPES \
"; do " \
"for disk in 0 1 ; do ${dtype} dev ${disk} ;" \
--
1.8.3
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
