Dear Fabio Estevam, > Hi Ruud, > > On Fri, May 31, 2013 at 3:56 AM, Ruud Commandeur <rcommand...@clb.nl> wrote: > > Hi everyone, > > > > I have been testing for a while now on the i.mx28 evk, and I noticed > > that almost all tftp transfers take some time before they actually > > start. It will show a 'T' as first character, then followed by '#' > > Besides the initial timeout you mentioned, I also see some timeouts > during the kernel transfer. > > I have just sent two patches converting mx28evk to use phylib, but I > still see the timeouts there. > > I see that in the kernel there is a workaround for LAN8270 low por > mode and I will try it when I have a chance. > > Please let me know if you make any progress on this.
I'm also having issues when pulling stuff from my main system via TFTP sometimes. This is manifesting by _lots_ of timeouts. The problem in this case is some weirdness in e1000e in my system, after I force-switch the main system to 100baseT (using ethtool -s eth0 speed 100 duplex full), I no longer get timeouts (even after I force-switch it back to 1000baseT later). But I suspect this is some network issue on my end. Best regards, Marek Vasut _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
