From: Fabio Estevam <fabio.este...@freescale.com>
No need to use the 'status' variable, so just remove it.
Signed-off-by: Fabio Estevam <fabio.este...@freescale.com>
---
Changes since v1:
- Drop status variable
board/freescale/vf610twr/vf610twr.c | 5 +----
1 file changed, 1 insertion(+), 4 deletions(-)
diff --git a/board/freescale/vf610twr/vf610twr.c
b/board/freescale/vf610twr/vf610twr.c
index 04fa882..f14df8b 100644
--- a/board/freescale/vf610twr/vf610twr.c
+++ b/board/freescale/vf610twr/vf610twr.c
@@ -301,16 +301,13 @@ int board_mmc_init(bd_t *bis)
NEW_PAD_CTRL(VF610_PAD_PTA28__ESDHC1_DAT2, ESDHC_PAD_CTRL),
NEW_PAD_CTRL(VF610_PAD_PTA29__ESDHC1_DAT3, ESDHC_PAD_CTRL),
};
- s32 status = 0;
esdhc_cfg[0].sdhc_clk = mxc_get_clock(MXC_ESDHC_CLK);
imx_iomux_v3_setup_multiple_pads(
esdhc1_pads, ARRAY_SIZE(esdhc1_pads));
- status |= fsl_esdhc_initialize(bis, &esdhc_cfg[0]);
-
- return status;
+ return fsl_esdhc_initialize(bis, &esdhc_cfg[0]);
}
#endif
--
1.8.1.2
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
