On 06/04/2013 01:17 PM, Fabio Estevam wrote: > When running the "save" command several times on a mx6qsabresd we see: > > U-Boot > save > Saving Environment to MMC... > Writing to MMC(1)... done > U-Boot > save > Saving Environment to MMC... > MMC partition switch failed > U-Boot > save > Saving Environment to MMC... > Writing to MMC(1)... done > U-Boot > save > Saving Environment to MMC... > MMC partition switch failed > U-Boot > save > Saving Environment to MMC... > Writing to MMC(1)... done > U-Boot > save > Saving Environment to MMC... > MMC partition switch failed > > Fix this by updating mmc->part_num inside mmc_switch_part() after a succesful > mmc partition switch.
This surely has exactly the same issue as the previous version, where the update of part_num was done inside common/env_mmc.c? _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot