On 06/04/2013 12:23 PM, Fabio Estevam wrote: > When running the "save" command several times on a mx6qsabresd we see: > > U-Boot > save > Saving Environment to MMC... > Writing to MMC(1)... done > U-Boot > save > Saving Environment to MMC... > MMC partition switch failed ... > Fix this by making mmc->part_num to be in sync with CONFIG_SYS_MMC_ENV_PART > after the partition has been changed in mmc_switch_part().
I deliberately didn't do this, because fini_mmc_for_env() passes the value of mmc->part_num to call mmc_switch_part() in order to put things back the way they were. This fix would break that. Can you investigate why you're seeing the "MMC partition switch failed" message? _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot