Dear "Nandini Hengen",
In message <b11fc910abee42fda27a3d279e222...@cerec> you wrote:
>
> I currently have a problem with the device tree - the
> kernel hangs after unpacking and trying to load the device tree.
...
> U-Boot Version 1.2 incl. downloaded patches
...
> combination with U-Boot 1.1.4). I also found a thread which recommended
> using the newest U-Boot version and loading the dtb file using tftp into RAM
> separately. Since then I've been using U-Boot 1.2. Until now non of the
> kernel images generated seem to load (apart from the image the module was
> originally shipped with)
Rigth. The U-Boot versions you mntion are way too old to know about
device tree handling.
> I tried this using two phytec modules - both of which are non-functional at
Well, and incorrect kernel will not render a board non-functional.
> I'm currently wondering whether to send back the modules to Phytec or
> compiling a different kernel and device tree would help.
I recommend to get a recent version of U-Boot running.
Best regards,
Wolfgang Denk
--
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: w...@denx.de
The night sky over the planet Krikkit is the least interesting sight
in the entire Universe.
- Douglas Adams _Life, the Universe, and Everything_
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
