Hi Thierry, On Thu, 16 May 2013 18:45:22 +0200, Thierry Bultel <thierry.bul...@wanadoo.fr> wrote:
> Le 16/05/2013 16:25, Albert ARIBAUD a écrit : > > Hi Thierry, > > > > On Thu, 16 May 2013 14:22:42 +0200, Thierry Bultel > > <thierry.bul...@wanadoo.fr> wrote: > > > >> Hi, > >> > >> I am trying to use u-boot configured for uboot_versatileqemu in > >> qemu-system-arm. > >> > >> I only get a black screen a no serial output at all. > >> I have tested several versions, and taken latest u-boot from > >> git://git.denx.de > >> > >> I have also upgraded qemu to 1.5.0-rc2 > >> > >> My command line is as follows: > >> > >> qemu-system-arm -M versatilepb -m 128M -kernel u-boot.bin -serial stdio > >> > >> > >> I have configured u-boot like that: > >> make CROSS_COMPILE=arm-linux-gnueabihf- versatileqemu_config > >> > >> My compiler is: > >> #arm-linux-gnueabihf-gcc --version > >> arm-linux-gnueabihf-gcc (crosstool-NG linaro-1.13.1-4.7-2012.10-20121022 > >> - Linaro GCC 2012.10) 4.7.3 20121001 (prerelease) > >> > >> I also tried the ca9x4_ct_vxp, because I often use vexpress kernels in > >> qemu for vexpress-a9, but no better success > >> > >> Is there a configuration that is known to work ? > > At least I know that versatileqemu on current u-boot-arm/master with > > wemu-system-arm v1.2.0 works, with command line > > > > qemu-system-arm -M versatilepb -m 128M -serial stdio -kernel > > u-boot -display none > > > > And I just tested without '-display none', and still get the serial > > prompt and U-Boot commands working. > > Thanks; > > I have taken u-boot-arm/master, and there is still no output neither with the > latest qemu, > nor with 1.2.2 > It could be thus be related to compiler I use. Which compiler are you using? > Would you mind testing my uboot image on your configuration ? No problem. > regards > Thierry > > > >> Best regards > >> Thierry > > Amicalement, > Amicalement, -- Albert. _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
