On Tue, Mar 31, 2009 at 4:54 PM, Wolfgang Denk <w...@denx.de> wrote: > Dear Jon Smirl, > > In message <20090331010330.20946.41742.st...@localhost> you wrote: >> Make the i2c delays smaller. The measured delay is 55us at >> 100Khz. Set the delay to 15us which should work for 400Khz. >> 100Khz will loop four times and get a 60us delay. Previous >> total delay was 100,000us new total delay is 150,000us before >> timeout. > > I think you did not even bother to read my comments to your previous > patch (foar from trying to understand and react on them). > > Sorry, NAK. Please at least answer the questions you've been asked.
You said: "I agree that the change itself looks harmless, and I'm willing to accept it, but at least make sure not to reduce the total timeout values - that would require re-testing on some boards." I made the total time out bigger just to be extra sure, but I could lower it back to 100ms. If this isn't ok. Just drop the patch and I'll keep it in my private tree. > > Best regards, > > Wolfgang Denk > > -- > DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel > HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany > Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: w...@denx.de > "I dislike companies that have a we-are-the-high-priests-of-hardware- > so-you'll-like-what-we-give-you attitude. I like commodity markets in > which iron-and-silicon hawkers know that they exist to provide fast > toys for software types like me to play with..." - Eric S. Raymond > -- Jon Smirl jonsm...@gmail.com _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
