Hi Rajeswari, On Sun, May 12, 2013 at 8:40 PM, Rajeshwari Birje <rajeshwari.bi...@gmail.com> wrote: > Hi Simon, > > Thank you for reviewing the patch set. > You need to apply the following patches for it to compile and work fine. > > EXYNOS: Add API for power reset and exit wakeup > EXYNOS: LDS file move to common > EXYNOS4210: Configure GPIO for uart > EXYNOS: Move files from board/samsung to arch/arm. > > From the error it looks like "EXYNOS: Add API for power reset and exit > wakeup" patch is missing.
Yes that fixes it, thank you. I sent an email to the maintainer with the list. > On Sun, May 12, 2013 at 12:09 AM, Simon Glass <s...@chromium.org> wrote: >> Hi Rajeshwari, >> >> On Wed, Apr 24, 2013 at 11:57 PM, Rajeshwari Shinde >> <rajeshwar...@samsung.com> wrote: >>> This patch performs the following: >>> >>> 1) Convert the assembly code for memory and clock initialization to C code. >>> 2) Move the memory and clock init codes from board/samsung to arch/arm >>> 3) Creat a common lowlevel_init file across Exynos4 and Exynos5. Converted >>> the common lowlevel_init from assembly to C-code >>> 4) Made spl_boot.c and tzpc_init.c common for both exynos4 and exynos5. >>> 5) Enable CONFIG_SKIP_LOWLEVEL_INIT as stack pointer initialisation is >>> already >>> done in _main. >>> 6) exynos-uboot-spl.lds made common across SMDKV310, Origen and SMDK5250. >>> >>> TEST: Tested SD-MMC boot on SMDK5250 and Origen. >>> Tested USB and SPI boot on SMDK5250 >>> Compile tested for SMDKV310. >>> >>> Signed-off-by: Hatim Ali <hatim...@samsung.com> >>> Signed-off-by: Rajeshwari Shinde <rajeshwar...@samsung.com> >> >> Congratulations on getting this patch together. >> >> It looks correct, but I had some problems getting it to build. >> Probably I am missing some other patch. >> >> Configuring for smdk5250 board... >> lowlevel_init.c: In function ‘do_lowlevel_init’: >> lowlevel_init.c:50:2: warning: implicit declaration of function >> ‘get_reset_status’ [-Wimplicit-function-declaration] >> spl_boot.c: In function ‘board_init_f’: >> spl_boot.c:141:3: warning: implicit declaration of function >> ‘power_exit_wakeup’ [-Wimplicit-function-declaration] >> arch/arm/cpu/armv7/exynos/libexynos.o: In function `board_init_f': >> /mnt/host/source/src/third_party/u-boot/files/arch/arm/cpu/armv7/exynos/spl_boot.c:141: >> undefined reference to `power_exit_wakeup' >> arch/arm/cpu/armv7/exynos/libexynos.o: In function `do_lowlevel_init': >> /mnt/host/source/src/third_party/u-boot/files/arch/arm/cpu/armv7/exynos/lowlevel_init.c:50: >> undefined reference to `get_reset_status' >> make[1]: *** [/mnt/host/source/src/third_party/u-boot/files/spl/u-boot-spl] >> Error 1 >> >> I will send a separate email about the patch situation. Here are the >> patches I applied in reverse order - please let me know if I missed >> any. >> >> d3858f7 (HEAD, snow2) EXYNOS: Move files from board/samsung to arch/arm. >> e666035 hack: Remove TPM definitions from exysno5-dt.h so that next >> patch applies cleanly >> c9ec2d1 EXYNOS4210: Configure GPIO for uart >> cf6e500 EXYNOS: LDS file move to common >> a40665b EXYNOS: Add API for power reset and shutdown [snip] Regards, Simon _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
