On 14/05/2013 11:51, Alison Wang wrote: > This patch adds FEC support for Vybrid MVF600 platform. > Add code to use RMII for MVF600. > > Signed-off-by: Alison Wang <b18...@freescale.com> > --- > Changes in v2: > - Use common FEC driver fec_mxc.c > > drivers/net/fec_mxc.c | 6 +++++- > 1 file changed, 5 insertions(+), 1 deletion(-) > > diff --git a/drivers/net/fec_mxc.c b/drivers/net/fec_mxc.c > index 4dbcdca..21e58f4 100644 > --- a/drivers/net/fec_mxc.c > +++ b/drivers/net/fec_mxc.c > @@ -518,7 +518,11 @@ static int fec_open(struct eth_device *edev) > u32 ecr = readl(&fec->eth->ecntrl) & ~FEC_ECNTRL_SPEED; > u32 rcr = (readl(&fec->eth->r_cntrl) & > ~(FEC_RCNTRL_RMII | FEC_RCNTRL_RMII_10T)) | > - FEC_RCNTRL_RGMII | FEC_RCNTRL_MII_MODE; > + FEC_RCNTRL_MII_MODE; > + if (fec->xcv_type == RGMII) > + rcr |= FEC_RCNTRL_RGMII; > + else if (fec->xcv_type == RMII) > + rcr |= FEC_RCNTRL_RMII; > if (speed == _1000BASET) > ecr |= FEC_ECNTRL_SPEED; > else if (speed != _100BASET) >
This can generally be applied, it is not only related to the new SOC. Acked-by: Stefano Babic <sba...@denx.de> Best regards, Stefano Babic -- ===================================================================== DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sba...@denx.de ===================================================================== _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
