Sebastian Hesselbarth <sebastian.hesselba...@gmail.com> writes: > This patch set add support for the Marvell Dove 88AP510 SoC and > the SolidRun CuBox board based on that SoC. The patch set is divided > into the four following sections: [...]
What's the state of this? I tried applying your patch series on top of current master and getting it to work on a CuBox Pro (2GiB SDRAM instead of 1GiB), but with no success so far. I changed kwbimage.cfg to match dramregs_cubox_2gb.txt in Rabeeh's tree and fixed arch/arm/cpu/armv7/dove/timer.c to work with the generic global_data (introduced by baa1e53 and 50b1fa3). However there seems to be something else missing or broken as there's no output whatsoever on the serial console after booting the new image via UART. The same boot procedure works fine with an image built using Rabeeh's tree. Sascha
pgppssB6CIeJy.pgp
Description: PGP signature
_______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
