-----Original Message----- From: Tom Rini [mailto:tom.r...@gmail.com] On Behalf Of Tom Rini Sent: Tuesday, May 14, 2013 6:13 AM To: Zhang Ying-B40530 Cc: u-boot@lists.denx.de; Wood Scott-B07421; Xie Xiaobo-R63061; Zhang Ying-B40530 Subject: Re: [U-Boot] [PATCH v2] common/Makefile: Add new symbol CONFIG_SPL_ENV_SUPPORT to replace CONFIG_SPL_NET_SUPPORT
On Mon, May 13, 2013 at 03:07:57PM +0800, ying.zh...@freescale.com wrote: > From: Ying Zhang <b40...@freescale.com> > > There will need the environment in SPL for reasons other than network > support (in particular, hwconfig contains info for how to set up DDR). > > Add a new symbol CONFIG_SPL_ENV_SUPPORT to replace CONFIG_SPL_NET_SUPPORT in > common/Makefile. [snip] > --- a/common/Makefile > +++ b/common/Makefile > @@ -44,7 +44,6 @@ COBJS-$(CONFIG_SYS_GENERIC_BOARD) += board_r.o > COBJS-y += cmd_boot.o > COBJS-$(CONFIG_CMD_BOOTM) += cmd_bootm.o > COBJS-y += cmd_help.o > -COBJS-y += cmd_nvedit.o > COBJS-y += cmd_version.o > > # environment > @@ -67,7 +66,6 @@ COBJS-$(CONFIG_ENV_IS_IN_ONENAND) += env_onenand.o > COBJS-$(CONFIG_ENV_IS_IN_SPI_FLASH) += env_sf.o > COBJS-$(CONFIG_ENV_IS_IN_REMOTE) += env_remote.o > COBJS-$(CONFIG_ENV_IS_IN_UBI) += env_ubi.o > -COBJS-$(CONFIG_ENV_IS_NOWHERE) += env_nowhere.o > > # command > COBJS-$(CONFIG_CMD_AMBAPP) += cmd_ambapp.o > @@ -214,18 +212,16 @@ COBJS-$(CONFIG_CMD_GPT) += cmd_gpt.o > endif > > ifdef CONFIG_SPL_BUILD > -COBJS-y += cmd_nvedit.o > -COBJS-y += env_common.o > COBJS-$(CONFIG_ENV_IS_IN_FLASH) += env_flash.o > COBJS-$(CONFIG_SPL_YMODEM_SUPPORT) += xyzModem.o > -COBJS-$(CONFIG_SPL_NET_SUPPORT) += cmd_nvedit.o > -COBJS-$(CONFIG_SPL_NET_SUPPORT) += env_attr.o > -COBJS-$(CONFIG_SPL_NET_SUPPORT) += env_callback.o > -COBJS-$(CONFIG_SPL_NET_SUPPORT) += env_common.o > -COBJS-$(CONFIG_SPL_NET_SUPPORT) += env_flags.o > -COBJS-$(CONFIG_SPL_NET_SUPPORT) += env_nowhere.o > COBJS-$(CONFIG_SPL_NET_SUPPORT) += miiphyutil.o > +COBJS-$(CONFIG_SPL_ENV_SUPPORT) += env_common.o > +COBJS-$(CONFIG_SPL_ENV_SUPPORT) += env_attr.o > +COBJS-$(CONFIG_SPL_ENV_SUPPORT) += env_flags.o > +COBJS-$(CONFIG_SPL_ENV_SUPPORT) += env_callback.o > endif > +COBJS-y += cmd_nvedit.o > +COBJS-$(CONFIG_ENV_IS_NOWHERE) += env_nowhere.o > COBJS-$(CONFIG_BOUNCE_BUFFER) += bouncebuf.o > COBJS-y += console.o > COBJS-y += dlmalloc.o Just move the whole CONFIG_ENV_IS_IN.. section down to where we always build objects, and update the comments in the Makefile in both spots. [Zhang Ying] For common lines(for example: cmd_nvedit.o) that shared by the SPL and non-SPL, can we move it to public area? So, we can avoid excessive SPL symbols. And a3m071 needs to be updated for CONFIG_SPL_ENV_SUPPORT too. Thanks! [Zhang Ying] In include/configs/a3m071.h, there was no CONFIG_SPL_NET_SUPPORT to be defined. Are you sure to add CONFIG_SPL_ENV_SUPPORT for it? _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot