Hello Kuo-Jung, Am 07.05.2013 08:32, schrieb Kuo-Jung Su: > From: Kuo-Jung Su <dant...@faraday-tech.com> > > Faraday FTI2C010 is a multi-function I2C controller > which supports both master and slave mode. > This patch simplily implements the master mode only. > > Signed-off-by: Kuo-Jung Su <dant...@faraday-tech.com> > CC: Heiko Schocher <h...@denx.de> > --- > Changes for v4: > - Coding Style cleanup. > - Make it a separate patch, rather then a part of > Faraday A36x patch series > - Use macro constants for timeout control > > Changes for v3: > - Coding Style cleanup. > - Drop macros for wirtel()/readl(), call them directly. > - Always insert a blank line between declarations and code. > - Replace all the infinite wait loop with a timeout. > - Add '__iomem' to all the declaration of HW register pointers. > > Changes for v2: > - Coding Style cleanup. > - Use readl(), writel(), clrsetbits_le32() to replace REG() macros. > - Use structure based hardware registers to replace the macro constants. > - Replace BIT() with BIT_MASK(). > > drivers/i2c/Makefile | 1 + > drivers/i2c/fti2c010.c | 371 > ++++++++++++++++++++++++++++++++++++++++++++++++ > drivers/i2c/fti2c010.h | 81 +++++++++++ > 3 files changed, 453 insertions(+) > create mode 100644 drivers/i2c/fti2c010.c > create mode 100644 drivers/i2c/fti2c010.h
As I posted the new i2c multibus/multiadapter framework: http://lists.denx.de/pipermail/u-boot/2013-May/153452.html maybe it is possible you can adapt your i2c driver based on this patches? > diff --git a/drivers/i2c/Makefile b/drivers/i2c/Makefile > index 5dbdbe3..ed2b8c0 100644 > --- a/drivers/i2c/Makefile > +++ b/drivers/i2c/Makefile > @@ -29,6 +29,7 @@ COBJS-$(CONFIG_BFIN_TWI_I2C) += bfin-twi_i2c.o > COBJS-$(CONFIG_DRIVER_DAVINCI_I2C) += davinci_i2c.o > COBJS-$(CONFIG_DW_I2C) += designware_i2c.o > COBJS-$(CONFIG_FSL_I2C) += fsl_i2c.o > +COBJS-$(CONFIG_FTI2C010) += fti2c010.o For the new framework this should be something like CONFIG_SYS_I2C_FTI2C010 ... and as I think, this name would be good also for the old framework. > COBJS-$(CONFIG_I2C_MVTWSI) += mvtwsi.o > COBJS-$(CONFIG_I2C_MV) += mv_i2c.o > COBJS-$(CONFIG_I2C_MXC) += mxc_i2c.o [...] Rest of your patch looks good to me ... bye, Heiko -- DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot