Hello Dirk, Am 06.05.2013 10:57, schrieb Dirk Eibach: > Hello Heiko, > > Am 04.05.2013 14:01, schrieb Heiko Schocher: >> It seems the timing is coming, to bring this finally in mainline >> and move boards over to the new i2c framework. >> >> Changes for v3 series: >> >> - Compiler collects the used i2c adapters in _u_boot_list_i2c, >> so no need for defining the used i2c adpaters in the board config >> file. >> -> drop CONFIG_SYS_NUM_I2C_ADAPTERS and CONFIG_SYS_I2C_ADAPTERS >> - Some adaptions for the keymile boards, so we can drop CONFIG_I2C_MUX >> completely >> - add ppc4xx_i2c driver, ported from Dirk Eibach >> >> Serie compiles clean on arm and powerpc >> >> Ported i2c drivers: >> soft_i2c : from me, tested on some arm and powerpc boards >> fsl_i2c : from me, only compile tested >> tegra_i2c : ported from Simon Glass >> ppc4xx_i2c: adapted from Dirk Eibach <dirk.eib...@gdsys.cc> >> tested on (which board?) with 4 soft_i2c drivers >> and one ppc4x_i2c driver. > > great to see you finally made it. > Testing was done on our iocon platform (which was the reason I started > the ppc4xx adaption). I will rebase on your patchset and post our ppc4xx > series again.
Thanks for your work! bye, Heiko -- DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
