Dear Wolfgang, Thank you very much . I have taken the *recent code*. Still facing some issues
I have followed following steps to compile it on x86. 1) make clean; 2) make coreboot-x86_config 3) ./MAKEALL -C x86 In step 3 i observed following: ravitiwari@RAVI-HP-Pavilion-dv2000-GJ175PA-ACJ:~/u-boot-2013.04$ make clean ravitiwari@RAVI-HP-Pavilion-dv2000-GJ175PA-ACJ:~/u-boot-2013.04$ make coreboot-x86_config Configuring for coreboot-x86 - Board: coreboot, Options: SYS_TEXT_BASE=0x01110000 ravitiwari@RAVI-HP-Pavilion-dv2000-GJ175PA-ACJ:~/u-boot-2013.04$ ./MAKEALL -C x86 Configuring for coreboot-x86 - Board: coreboot, Options: SYS_TEXT_BASE=0x01110000 make[1]: *** [interrupts.o] Error 127 make: *** [arch/x86/cpu/libx86.o] Error 2 make[1]: *** [coreboot.o] Error 127 make: *** [arch/x86/cpu/coreboot/libcoreboot.o] Error 2 make[1]: *** [bootm.o] Error 127 make: *** [arch/x86/lib/libx86.o] Error 2 size: './u-boot': No such file /bin/bash: sparse: command not found make[1]: *** [interrupts.o] Error 127 make: *** [arch/x86/cpu/libx86.o] Error 2 make: *** Waiting for unfinished jobs.... /bin/bash: sparse: command not found make[1]: *** [coreboot.o] Error 127 make: *** [arch/x86/cpu/coreboot/libcoreboot.o] Error 2 /bin/bash: sparse: command not found make[1]: *** [bootm.o] Error 127 make: *** [arch/x86/lib/libx86.o] Error 2 make: INTERNAL: Exiting with 4 jobserver tokens available; should be 3! --------------------- SUMMARY ---------------------------- Boards compiled: 1 Boards with errors: 1 ( coreboot-x86 ) ---------------------------------------------------------- If at present i am not targeting any embedded platform then why i need *cross tool chain*? x86 tool chain (GCC compiler) is already there in my system. Regards, Ravi Tiwari On Sun, May 5, 2013 at 2:01 AM, Wolfgang Denk <[email protected]> wrote: > Dear Ravi Kant Tiwari, > > In message <[email protected]> you wrote: > > I have download and extracted u-boot-1.1.6 on Linux ubuntu. I just want > to > > compile the source code using GCC(not targeting cross compilation for any > > embedded platform). > > First: U-Boot 1.1.6 is prehistoric (more than 7 years old). If you > intend to do anything with U-Boot, then please use recent code. > > > My understanding is irrespective of platform the source code should > compile. > > Your understanding is incomplete / incorrect. > > > What are the necessary makefile and environment changes i need to do for > > compilation on x86? > > No changes are needed, but dependingon which exact target board you > are compiling for, you will need a cross tool chain for the respective > target architecture. > > Best regards, > > Wolfgang Denk > > -- > DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel > HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany > Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: [email protected] > No journaling file system can recover your data if the disk dies. > - Steve Rago in <[email protected]> >
_______________________________________________ U-Boot mailing list [email protected] http://lists.denx.de/mailman/listinfo/u-boot
