Dear Fabio Estevam, > From: Fabio Estevam <[email protected]> > > Registers HW_PINCTRL_DRIVE9, HW_PINCTRL_DRIVE10, HW_PINCTRL_DRIVE11, > HW_PINCTRL_DRIVE12, HW_PINCTRL_DRIVE13 and HW_PINCTRL_DRIVE14 control the > drive strength and the voltage selection for the DDR pins. > > The reset values of the voltage selection pins are '1', which is marked as > 'reserved' in the mx23 reference manual. > > Clear these bits for proper operation of DDR. > > Also change MUX_CONFIG_EMI, which results in better stability and match the > bootlets code from Freescale. > > Signed-off-by: Fabio Estevam <[email protected]>
Lost of duplicated code here. Best regards, Marek Vasut _______________________________________________ U-Boot mailing list [email protected] http://lists.denx.de/mailman/listinfo/u-boot
