Using CONFIG_AT91FAMILY replace #ifdeferry for atmel SoC
Signed-off-by: Bo Shen <[email protected]>
---
drivers/net/macb.c | 10 ++--------
1 file changed, 2 insertions(+), 8 deletions(-)
diff --git a/drivers/net/macb.c b/drivers/net/macb.c
index 8bacbda..753fb96 100644
--- a/drivers/net/macb.c
+++ b/drivers/net/macb.c
@@ -466,19 +466,13 @@ static int macb_init(struct eth_device *netdev, bd_t *bd)
/* choose RMII or MII mode. This depends on the board */
#ifdef CONFIG_RMII
-#if defined(CONFIG_AT91CAP9) || defined(CONFIG_AT91SAM9260) || \
- defined(CONFIG_AT91SAM9263) || defined(CONFIG_AT91SAM9G20) || \
- defined(CONFIG_AT91SAM9G45) || defined(CONFIG_AT91SAM9M10G45) || \
- defined(CONFIG_AT91SAM9XE) || defined(CONFIG_AT91SAM9X5)
+#ifdef CONFIG_AT91FAMILY
macb_writel(macb, USRIO, MACB_BIT(RMII) | MACB_BIT(CLKEN));
#else
macb_writel(macb, USRIO, 0);
#endif
#else
-#if defined(CONFIG_AT91CAP9) || defined(CONFIG_AT91SAM9260) || \
- defined(CONFIG_AT91SAM9263) || defined(CONFIG_AT91SAM9G20) || \
- defined(CONFIG_AT91SAM9G45) || defined(CONFIG_AT91SAM9M10G45) || \
- defined(CONFIG_AT91SAM9XE) || defined(CONFIG_AT91SAM9X5)
+#ifdef CONFIG_AT91FAMILY
macb_writel(macb, USRIO, MACB_BIT(CLKEN));
#else
macb_writel(macb, USRIO, MACB_BIT(MII));
--
1.7.9.5
_______________________________________________
U-Boot mailing list
[email protected]
http://lists.denx.de/mailman/listinfo/u-boot
