Thanks a lot Anatolij! I have done the following changes:
============ --- include/configs/pcm030.h.org 2009-03-28 18:15:31.000000000 +0100 +++ include/configs/pcm030.h 2009-03-29 10:49:52.000000000 +0200 @@ -156,8 +156,8 @@ #define CONFIG_PCI_MEM_BUS 0x40000000 #define CONFIG_PCI_MEM_PHYS CONFIG_PCI_MEM_BUS #define CONFIG_PCI_MEM_SIZE 0x10000000 -#define CONFIG_PCI_IO_BUS 0x50000000 -#define CONFIG_PCI_IO_PHYS CONFIG_PCI_IO_BUS +#define CONFIG_PCI_IO_BUS 0x00000000 +#define CONFIG_PCI_IO_PHYS 0x50000000 #define CONFIG_PCI_IO_SIZE 0x01000000 #define CONFIG_SYS_XLB_PIPELINING 1 @@ -247,8 +247,8 @@ # define CONFIG_SYS_RAMBOOT 1 #endif -#define CONFIG_SYS_MONITOR_LEN (192 << 10) /* Reserve 192 kB for Monitor */ -#define CONFIG_SYS_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc() */ +#define CONFIG_SYS_MONITOR_LEN (1024 << 10) /* Reserve 1024 kB for Monitor */ +#define CONFIG_SYS_MALLOC_LEN (1024 << 10) /* Reserve 1024 kB for malloc() */ #define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */ /*----------------------------------------------------------------------------- @@ -460,4 +460,18 @@ #define OF_SOC "soc5...@f0000000" #define OF_STDOUT_PATH "/soc5...@f0000000/ser...@2400" +#define CONFIG_VIDEO +#ifdef CONFIG_VIDEO + #define CONFIG_BIOSEMU /* x86 bios emulator for vga bios */ + #define CONFIG_ATI_RADEON_FB /* use radeon framebuffer driver */ + #define VIDEO_IO_OFFSET CONFIG_PCI_IO_PHYS + #define CONFIG_SYS_ISA_IO_BASE_ADDRESS VIDEO_IO_OFFSET + #define CONFIG_VIDEO_SW_CURSOR + #define CONFIG_VIDEO_LOGO + #define CONFIG_CFB_CONSOLE + #define CONFIG_SPLASH_SCREEN + #define CONFIG_VGA_AS_SINGLE_DEVICE + #define CONFIG_CMD_BMP +#endif + #endif /* __CONFIG_H */ ============ So, I see now the u-boot on the monitor. More tests will follow. I changed also CONFIG_SYS_MONITOR_LEN and CONFIG_SYS_MALLOC_LEN. I do not know, what are the minimum values that are working. But 128 and 256 for CONFIG_SYS_MALLOC_LEN are to small and with the above values it is working - so it is okay for me. Where can I read more about that options (and the options for video)? Are there documentations or should I read the source code (that is no problem, but it will be cost a lot of time)? Thanks again. Greats, Markus _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
