This allow for easy update of firmware in the SD card from a running
U-Boot.

Signed-off-by: Otavio Salvador <ota...@ossystems.com.br>
---
Changes in v3:
- New patch

Changes in v2: None

 include/configs/mx6qsabre_common.h | 14 ++++++++++++++
 1 file changed, 14 insertions(+)

diff --git a/include/configs/mx6qsabre_common.h 
b/include/configs/mx6qsabre_common.h
index 015e2b0..a32d7dd 100644
--- a/include/configs/mx6qsabre_common.h
+++ b/include/configs/mx6qsabre_common.h
@@ -78,6 +78,7 @@
 
 #define CONFIG_CMD_BMODE
 #define CONFIG_CMD_BOOTZ
+#define CONFIG_CMD_SETEXPR
 #undef CONFIG_CMD_IMLS
 
 #define CONFIG_BOOTDELAY               10
@@ -98,6 +99,19 @@
        "mmcdev=" __stringify(CONFIG_SYS_MMC_ENV_DEV) "\0" \
        "mmcpart=" __stringify(CONFIG_SYS_MMC_ENV_PART) "\0" \
        "mmcroot=" CONFIG_MMCROOT " rootwait rw\0" \
+       "update_sd_firmware=" \
+               "if test ${ip_dyn} = yes; then " \
+                       "setenv get_cmd dhcp; " \
+               "else " \
+                       "setenv get_cmd tftp; " \
+               "fi; " \
+               "if mmc dev ${mmcdev}; then "   \
+                       "if ${get_cmd} ${update_sd_firmware_filename}; then " \
+                               "setexpr fw_sz ${filesize} / 0x200; " \
+                               "setexpr fw_sz ${fw_sz} + 1; "  \
+                               "mmc write ${loadaddr} 0x2 ${fw_sz}; " \
+                       "fi; "  \
+               "fi\0" \
        "mmcargs=setenv bootargs console=${console},${baudrate} " \
                "root=${mmcroot}\0" \
        "loadbootscript=" \
-- 
1.8.1

_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot

Reply via email to