Dear Benoît Thébaudeau,
> On Friday, April 19, 2013 10:38:48 AM, Benoît Thébaudeau wrote:
> > Dear Marek Vasut,
> >
> > On Friday, April 19, 2013 6:10:51 AM, Marek Vasut wrote:
> > > Add support for generic NAND SPL via the SPL framework into the
> > > mxc_nand_spl driver. This is basically just a simple rename and
> > > publication of the already implemented functions. To avoid the
> > > old function which are used with the nand_spl/ stuff getting in
> > > the way of NAND SPL framework, the macro CONFIG_SPL_NAND_LEGACY
> > > was introduced and two remaining legacy boards were adjusted.
> > > These board need to be either fixed or removed in the long run,
> > > but I don't have either.
> > >
> > > Also make sure the requested payload is aligned to full pages,
> > > otherwise this simple driver fails to load the last page.
> > >
> > > Signed-off-by: Marek Vasut <ma...@denx.de>
> > > Cc: Albert ARIBAUD <albert.u.b...@aribaud.net>
> > > Cc: Benoît Thébaudeau <benoit.thebaud...@advansee.com>
> > > Cc: Fabio Estevam <fabio.este...@freescale.com>
> > > Cc: Scott Wood <scottw...@freescale.com>
> > > Cc: Stefano Babic <sba...@denx.de>
> > > Cc: Tom Rini <tr...@ti.com>
> > > ---
> > >
> > > drivers/mtd/nand/mxc_nand_spl.c | 13 ++++++++++---
> > > include/configs/mx31pdk.h | 1 +
> > > include/configs/tx25.h | 1 +
> > > 3 files changed, 12 insertions(+), 3 deletions(-)
> > >
> > > diff --git a/drivers/mtd/nand/mxc_nand_spl.c
> > > b/drivers/mtd/nand/mxc_nand_spl.c
> > > index 09f23c3..8ff03c9 100644
> > > --- a/drivers/mtd/nand/mxc_nand_spl.c
> > > +++ b/drivers/mtd/nand/mxc_nand_spl.c
> > > @@ -290,7 +290,7 @@ static int is_badblock(int pagenumber)
> > >
> > > return 0;
> > >
> > > }
> > >
> > > -static int nand_load(unsigned int from, unsigned int size, unsigned
> > > char *buf)
> > > +int nand_spl_load_image(uint32_t from, unsigned int size, void *buf)
> > >
> > > {
> > >
> > > int i;
> > > unsigned int page;
> > >
> > > @@ -303,6 +303,7 @@ static int nand_load(unsigned int from, unsigned
> > > int size, unsigned char *buf)
> > >
> > > page = from / CONFIG_SYS_NAND_PAGE_SIZE;
> > > i = 0;
> > >
> > > + size = roundup(size, CONFIG_SYS_NAND_PAGE_SIZE);
> > >
> > > while (i < size / CONFIG_SYS_NAND_PAGE_SIZE) {
> > >
> > > if (nfc_read_page(page, buf) < 0)
> > >
> > > return -1;
> > >
> > > @@ -332,6 +333,7 @@ static int nand_load(unsigned int from, unsigned
> > > int size, unsigned char *buf)
> > >
> > > return 0;
> > >
> > > }
> > >
> > > +#ifdef CONFIG_SPL_NAND_SUPPORT_LEGACY
> > >
> > > /*
> > >
> > > * The main entry for NAND booting. It's necessary that SDRAM is
> > > already * configured and available since this code loads the main
> > > U-Boot image
> > >
> > > @@ -345,8 +347,9 @@ void nand_boot(void)
> > >
> > > * CONFIG_SYS_NAND_U_BOOT_OFFS and CONFIG_SYS_NAND_U_BOOT_SIZE must
> > > * be aligned to full pages
> > > */
> > >
> > > - if (!nand_load(CONFIG_SYS_NAND_U_BOOT_OFFS,
> > > CONFIG_SYS_NAND_U_BOOT_SIZE, - (uchar
> > > *)CONFIG_SYS_NAND_U_BOOT_DST)) {
> > > + if (!nand_spl_load_image(CONFIG_SYS_NAND_U_BOOT_OFFS,
> > > + CONFIG_SYS_NAND_U_BOOT_SIZE,
> > > + (uchar *)CONFIG_SYS_NAND_U_BOOT_DST)) {
> > >
> > > /* Copy from NAND successful, start U-boot */
> > > uboot = (void *)CONFIG_SYS_NAND_U_BOOT_START;
> > > uboot();
> > >
> > > @@ -364,3 +367,7 @@ void hang(void)
> > >
> > > /* Loop forever */
> > > while (1) ;
> > >
> > > }
> > >
> > > +#endif
> > > +
> > > +void nand_init(void) {}
> > > +void nand_deselect(void) {}
> > > diff --git a/include/configs/mx31pdk.h b/include/configs/mx31pdk.h
> > > index 1754595..217552e 100644
> > > --- a/include/configs/mx31pdk.h
> > > +++ b/include/configs/mx31pdk.h
> > > @@ -50,6 +50,7 @@
> > >
> > > #define CONFIG_SPL_LDSCRIPT "arch/$(ARCH)/cpu/u-boot-spl.lds"
> > > #define CONFIG_SPL_MAX_SIZE 2048
> > > #define CONFIG_SPL_NAND_SUPPORT
> > >
> > > +#define CONFIG_SPL_NAND_SUPPORT_LEGACY
> > >
> > > #define CONFIG_SPL_TEXT_BASE 0x87dc0000
> > > #define CONFIG_SYS_TEXT_BASE 0x87e00000
> > >
> > > diff --git a/include/configs/tx25.h b/include/configs/tx25.h
> > > index e72f8f6..7c362d0 100644
> > > --- a/include/configs/tx25.h
> > > +++ b/include/configs/tx25.h
> > > @@ -37,6 +37,7 @@
> > >
> > > #define CONFIG_SPL_LDSCRIPT "arch/$(ARCH)/cpu/u-boot-
spl.lds"
> > > #define CONFIG_SPL_MAX_SIZE 2048
> > > #define CONFIG_SPL_NAND_SUPPORT
> > >
> > > +#define CONFIG_SPL_NAND_SUPPORT_LEGACY
> > >
> > > #define CONFIG_SPL_TEXT_BASE 0x810c0000
> > > #define CONFIG_SYS_TEXT_BASE 0x81200000
> > >
> > > --
> > > 1.7.11.7
> >
> > This is not about legacy vs. non-legacy. This is about basic vs. more
> > featured
> > SPL because of SPL size constraints. So what about dropping
> > CONFIG_SPL_NAND_SUPPORT_LEGACY and testing for CONFIG_SPL_FRAMEWORK
> > definition
> > instead?
I was thinking about that, but the symbol is unrelated to NAND. I still think
it's either a matter of fixing for new SPL or removing those two boards. The
nand_spl/ stuff shall be removed ASAP.
> Also, I don't see any nand_init() (called by spl_nand_load_image()) for
> m53evk.
What do you mean?
Best regards,
Marek Vasut
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
