On Friday, April 19, 2013 11:02:03 AM, Benoît Thébaudeau wrote:
> Dear Marek Vasut,
>
> On Friday, April 19, 2013 6:10:54 AM, Marek Vasut wrote:
> > Augment the MX5 clock code with function to enable and configure
> > NFC clock. This is necessary to get NFC working on MX5.
> >
> > Signed-off-by: Marek Vasut <ma...@denx.de>
> > Cc: Albert ARIBAUD <albert.u.b...@aribaud.net>
> > Cc: Benoît Thébaudeau <benoit.thebaud...@advansee.com>
> > Cc: Fabio Estevam <fabio.este...@freescale.com>
> > Cc: Scott Wood <scottw...@freescale.com>
> > Cc: Stefano Babic <sba...@denx.de>
> > Cc: Tom Rini <tr...@ti.com>
> > ---
> > arch/arm/cpu/armv7/mx5/clock.c | 14 ++++++++++++--
> > arch/arm/include/asm/arch-mx5/clock.h | 1 +
> > 2 files changed, 13 insertions(+), 2 deletions(-)
> >
> > diff --git a/arch/arm/cpu/armv7/mx5/clock.c
> > b/arch/arm/cpu/armv7/mx5/clock.c
> > index 76c2c52..431756e 100644
> > --- a/arch/arm/cpu/armv7/mx5/clock.c
> > +++ b/arch/arm/cpu/armv7/mx5/clock.c
> > @@ -739,10 +739,11 @@ static int config_core_clk(u32 ref, u32 freq)
> > static int config_nfc_clk(u32 nfc_clk)
> > {
> > u32 parent_rate = get_emi_slow_clk();
> > - u32 div = parent_rate / nfc_clk;
> > + u32 div;
> >
> > - if (nfc_clk <= 0)
> > + if (nfc_clk == 0)
> > return -EINVAL;
> > + div = parent_rate / nfc_clk;
> > if (div == 0)
> > div++;
> > if (parent_rate / div > NFC_CLK_MAX)
> > @@ -755,6 +756,15 @@ static int config_nfc_clk(u32 nfc_clk)
> > return 0;
> > }
> >
> > +void enable_nfc_clk(unsigned char enable)
> > +{
> > + unsigned int cg = enable ? MXC_CCM_CCGR_CG_ON : MXC_CCM_CCGR_CG_OFF;
> > +
> > + clrsetbits_le32(&mxc_ccm->CCGR5,
> > + MXC_CCM_CCGR5_EMI_ENFC(MXC_CCM_CCGR_CG_MASK),
> > + MXC_CCM_CCGR5_EMI_ENFC(cg));
> > +}
> > +
> > /* Config main_bus_clock for periphs */
> > static int config_periph_clk(u32 ref, u32 freq)
> > {
> > diff --git a/arch/arm/include/asm/arch-mx5/clock.h
> > b/arch/arm/include/asm/arch-mx5/clock.h
> > index 9cdfb48..6910192 100644
> > --- a/arch/arm/include/asm/arch-mx5/clock.h
> > +++ b/arch/arm/include/asm/arch-mx5/clock.h
> > @@ -68,5 +68,6 @@ void set_usboh3_clk(void);
> > void enable_usboh3_clk(unsigned char enable);
> > void mxc_set_sata_internal_clock(void);
> > int enable_i2c_clk(unsigned char enable, unsigned i2c_num);
> > +void enable_nfc_clk(unsigned char enable);
> >
> > #endif /* __ASM_ARCH_CLOCK_H */
> > --
> > 1.7.11.7
>
> Reviewed-by: Benoît Thébaudeau <benoit.thebaud...@advansee.com>
Actually, this code is correct, but why is it needed? Indeed, this clock is
already ungated by arch/arm/cpu/armv7/mx5/lowlevel_init.S. Also, your board
seems to be hardware-bootable only from NAND, so in this case the boot ROM also
ungates this clock itself.
Best regards,
Benoît
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
