On 04/16/2013 11:17 AM, Albert ARIBAUD wrote: > Hi Tom, > > On Mon, 15 Apr 2013 16:28:20 -0700, Tom Warren > <twarren.nvi...@gmail.com> wrote: > >> Albert, >> >> Please pull u-boot-tegra/master into ARM/master. Thanks! >> >> ./MAKEALL for all the Tegra boards is OK, running a ./MAKEALL -a arm now. >> tools/checkpatch.pl is clean. >> >> The following changes since commit c4a4e2e20ca226948b62ed116df98f7a3932f2ac: >> >> ARMv7: start.S: stay in HYP mode if u-boot is entered in it (2013-04-15 >> 18:30:59 +0200) >> >> are available in the git repository at: >> >> git://git.denx.de/u-boot-tegra master >> >> for you to fetch changes up to 601795462a4e7ede97b64dc306de1002e688eef6: >> >> Tegra: T30: Beaver board support. (2013-04-15 16:13:51 -0700) > > +Tom R > > Build-testing done on ARM, all fine ; launching some non-ARM tests just > in case. In parallel I'm struggling to run-test on TrimSlice as Stephen > W and Tom W know :), so either someone confirms that ARM ToT does not > break their own Tegra HW, or my 'applied' will have to wait a couple of > hours more, until I apply the Trimslice recipe Stephen gave me off-list.
FWIW, I just tested both u-boot-arm/master and u-boot-tegra/master on TrimSlice and they work fine (well, at least boot to the command-prompt anyway) ARM: c4a4e2e ARMv7: start.S: stay in HYP mode if u-boot is entered in it Tegra: 6017954 Tegra: T30: Beaver board support. _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
