IFC errata A003399 is valid for IFC NOR boot i.e.if no on-board NOR flash or
no NOR boot, do not compile its workaround.
Signed-off-by: Prabhakar Kushwaha <prabha...@freescale.com>
---
Based upon git://git.denx.de/u-boot.git branch master
Changes for v2:
- Add CONFIG_A003399_NOR_WORKAROUND for errata workaround
- Add CONFIG_A003399_NOR_WORKAROUND in README
Changes for v3:
- Use only CONFIG_A003399_NOR_WORKAROUND for errata workaround
Changes for v4: Sending as it is
README | 4 ++++
arch/powerpc/cpu/mpc85xx/cpu_init_early.c | 6 +++---
arch/powerpc/cpu/mpc8xxx/fsl_ifc.c | 2 +-
3 files changed, 8 insertions(+), 4 deletions(-)
diff --git a/README b/README
index 67a071f..f06a60b 100644
--- a/README
+++ b/README
@@ -414,6 +414,10 @@ The following options need to be configured:
See Freescale App Note 4493 for more information about
this erratum.
+ CONFIG_A003399_NOR_WORKAROUND
+ Enables a workaround for IFC erratum A003399. It is only
+ requred during NOR boot.
+
CONFIG_SYS_FSL_CORENET_SNOOPVEC_COREONLY
This is the value to write into CCSR offset 0x18600
diff --git a/arch/powerpc/cpu/mpc85xx/cpu_init_early.c
b/arch/powerpc/cpu/mpc85xx/cpu_init_early.c
index dacfdd1..439a873 100644
--- a/arch/powerpc/cpu/mpc85xx/cpu_init_early.c
+++ b/arch/powerpc/cpu/mpc85xx/cpu_init_early.c
@@ -25,7 +25,7 @@
DECLARE_GLOBAL_DATA_PTR;
-#if defined(CONFIG_SYS_FSL_ERRATUM_IFC_A003399) && !defined(CONFIG_SYS_RAMBOOT)
+#ifdef CONFIG_A003399_NOR_WORKAROUND
void setup_ifc(void)
{
struct fsl_ifc *ifc_regs = (void *)CONFIG_SYS_IFC_ADDR;
@@ -99,7 +99,7 @@ void cpu_init_early_f(void)
#ifdef CONFIG_SYS_FSL_ERRATUM_P1010_A003549
ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
#endif
-#if defined(CONFIG_SYS_FSL_ERRATUM_IFC_A003399) && !defined(CONFIG_SYS_RAMBOOT)
+#ifdef CONFIG_A003399_NOR_WORKAROUND
ccsr_l2cache_t *l2cache = (void *)CONFIG_SYS_MPC85xx_L2_ADDR;
u32 *dst, *src;
void (*setup_ifc_sram)(void);
@@ -138,7 +138,7 @@ void cpu_init_early_f(void)
* Work Around for IFC Erratum A003399, issue will hit only when execution
* from NOR Flash
*/
-#if defined(CONFIG_SYS_FSL_ERRATUM_IFC_A003399) && !defined(CONFIG_SYS_RAMBOOT)
+#ifdef CONFIG_A003399_NOR_WORKAROUND
#define SRAM_BASE_ADDR (0x00000000)
/* TLB for SRAM */
mas0 = MAS0_TLBSEL(1) | MAS0_ESEL(9);
diff --git a/arch/powerpc/cpu/mpc8xxx/fsl_ifc.c
b/arch/powerpc/cpu/mpc8xxx/fsl_ifc.c
index 56b319f..959a0e2 100644
--- a/arch/powerpc/cpu/mpc8xxx/fsl_ifc.c
+++ b/arch/powerpc/cpu/mpc8xxx/fsl_ifc.c
@@ -43,7 +43,7 @@ void init_early_memctl_regs(void)
set_ifc_ftim(IFC_CS0, IFC_FTIM2, CONFIG_SYS_CS0_FTIM2);
set_ifc_ftim(IFC_CS0, IFC_FTIM3, CONFIG_SYS_CS0_FTIM3);
-#if !defined(CONFIG_SYS_FSL_ERRATUM_IFC_A003399) || defined(CONFIG_SYS_RAMBOOT)
+#ifndef CONFIG_A003399_NOR_WORKAROUND
#ifdef CONFIG_SYS_CSPR0_EXT
set_ifc_cspr_ext(IFC_CS0, CONFIG_SYS_CSPR0_EXT);
#endif
--
1.7.9.5
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
