Dear Vivek Gautam, > Based on 'u-boot-usb' master branch. > > This patch-series includes majorly some clean-up, few fixes and > then some basic super-speed usb infrastructure addition, to help > put support for XHCI in near future. > > Changes from v2: > - Added a patch "usb: common: Weed out USB_**_PRINTFs from usb framework" > to replace USB_***_PRINTF with debug() so as to get rid of unnecessary > DEBUG macros in usb common framework and thereby rebasing other patches > on top of this so that no USB_PRINTF appears further. > - Added a patch to reset only USB 2.0 ports, since USB 3.0 protocol ports > don't require a reset to happen to move to 'enabled' state. > - Added a patch to move definition of 'min3()' out of ehci-hcd and putting > the same as macro definition in common header. > - Using a 'switch-case' in portspeed() in cmd_usb.c > > Changes from v1: > - Fixing the issue with 'ifno' as well as added 'if_desc'. > - Instead of turning-on only powered-off hub ports, power-cycle all > the hub ports (aka: turning off and then turning on again power to > all the ports. > - Fixing commenting style problem in > 'usb: Update device class in usb device's descriptor' > - Fixing typo in commit message for > 'usb: hub: Fix enumration timeout' > - Removing separate definition for 'struct usb_ep_desc'; thereby adding > 'struct usb_ss_ep_comp_descriptor' to 'struct usb_interface' only. > As a result modifying the patch accordingly also dropping the patch > 'usb: eth: Fix for updated usb interface descriptor structure' > - Dropping the patch 'usb: hub: Increase device enumeration timeout for > broken drives' for now (will come back with a solution at later point of > time).
Applied all but the last one, let's now base all subsequent patches on u-boot- usb/next please. Best regards, Marek Vasut _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot