Hi Albert,
On Thursday, April 11, 2013 1:12:17 AM, Albert ARIBAUD wrote:
> Hello,
>
> The following changes since commit
> 009d75ccc11d27b9a083375a88bb93cb746b4800:
>
> Merge branch 'u-boot/master' into 'u-boot-arm/master' (2013-03-28
> 18:50:01 +0100)
>
> are available in the git repository at:
>
>
> git://git.denx.de/u-boot-arm master
>
> for you to fetch changes up to aad17a2f2bdd0b456522e24a90a0f8b8d8adb1f9:
>
> ARM: fix CONFIG_SPL_MAX_SIZE semantics (2013-04-11 00:18:03 +0200)
>
> *** NOTE *** there should be a single, and trivial, merge conflict on
> file drivers/video/exynos_fb.c.
>
> ----------------------------------------------------------------
> Abbas Raza (1):
> mmc: i.MX6: fsl_esdhc: Define maximum bus width supported by a
> board
>
> Ajay Kumar (13):
> video: exynos_fb: Remove callbacks from the driver
> video: exynos_dp: Remove callbacks from the driver
> video: exynos_fb: Make fimd_ctrl global
> EXYNOS: FDT: Add compatible strings for FIMD
> video: exynos_fb: add DT support for FIMD driver
> EXYNOS5: Add device node for FIMD
> SMDK5250: Add device node for FIMD
> video: exynos_dp: Make dp_regs global
> EXYNOS5: FDT: Add compatible strings for FIMD
> video: exynos_dp: Add function to parse DP DT node
> EXYNOS5: Add device node for DP
> SMDK5250: Add device node for DP
> SMDK5250: Use statically defined structures only in non DT case
>
> Akshay Saraswat (8):
> Exynos: clock: Fix a bug in PLL lock check condition
> Exynos: Add hardware accelerated SHA256 and SHA1
> Exynos: config: Enable ACE HW for SHA 256 for Exynos
> gen: Add sha h/w acceleration to hash
> Exynos: config: Enable hash command
> Exynos5: clock: Fix a typo bug in exynos clock init
> Exynos5: config: enable time command
> Exynos: pwm: Remove dead code of function exynos5_get_pwm_clk
>
> Albert ARIBAUD (7):
> Merge branch 'u-boot-imx/master' into 'u-boot-arm/master'
> Merge branch 'u-boot-samsung/master' into 'u-boot-arm/master'
> Merge branch 'u-boot-ti/master' into 'u-boot-arm/master'
> cam_enc_4xx: fix CONFIG_SPL_MAX_SIZE semantics
> da850evm, da850_am18xxevm: fix CONFIG_SPL_MAX_SIZE semantics
> smdk5250, snow: fix CONFIG_SPL_MAX_SIZE semantics
> ARM: fix CONFIG_SPL_MAX_SIZE semantics
>
> Alexandre Pereira da Silva (1):
> mx23_olinuxino: Fix netboot console
>
> Andreas Bießmann (6):
> omap3/cpu.h: add BCH support
> asm/omap_gpmc.h: consolidate common defines
> omap3/omap_gpmc.h: add ooblayout for BCH8 as in kernel
> omap_gpmc: change nandecc command
> omap_gpmc: add support for hw assisted BCH8
> tricorder: enable hw assisted BCH8 in SPL and u-boot
>
> Benoît Thébaudeau (29):
> mx25pdk: Enable imxdi RTC
> nand: mxc: Prepare to add support for i.MX5
> nand: mxc: Add support for i.MX5
> imx: mx5: lowlevel_init: Simplify code
> imx: mx53ard: Add support for NAND Flash
> nand: mxc: Fix debug trace in mxc_nand_read_oob_syndrome()
> nand: mxc: Use appropriate page number in syndrome functions
> arm: start.S: Fix _TEXT_BASE for SPL
> arm: relocate_code() is no longer noreturn
> arm1136: Remove redundant relocate_code() return
> arm: relocate_code(): Remove useless relocation offset computation
> arm: relocate_code(): Use __image_copy_end for end of relocation
> arm: crt0.S: Remove bogus .globl
> autoconfig.mk: Make it possible to define configs from other
> configs Makefile: Change CONFIG_SPL_PAD_TO to image offset
> imx: Fix automatic make targets for imx images
> nand: mxc: Switch NAND SPL to generic SPL
> arm926ejs: Remove deprecated and now unused NAND SPL
> arm: Remove unused relocate_code() parameters
> Makefile: Move SHELL setup to config.mk
> .gitignore: Add /SPL
> imx: Add u-boot-with-spl.imx make target
> imx: Add u-boot-with-nand-spl.imx make target
> arm: Remove support for smdk6400
> Revert "mkconfig: start deprecating Makefile config targets"
> arm: Remove support for unused s3c64xx
> arm: Remove deprecated and now unused NAND SPL
> arm1176: Remove unused MMU setup from start.S
> arm: Make all linker scripts compatible with per-symbol sections
>
> Bin Liu (2):
> musb: am335x: disable bulk split-combine feature
> musb: set MUSB speed based on CONFIG
>
> Che-Liang Chiou (1):
> Exynos: Add timer_get_us function
>
> Dirk Behme (1):
> spi: mxc_spi: Fix ECSPI reset handling
>
> Eric Nelson (2):
> i.MX6: Add hdmidet command to detect attached HDMI monitor
> i.MX6: mx6qsabrelite: discard override of CONFIG_ARP_TIMEOUT
>
> Fabio Estevam (13):
> mxs: spl_mem_init: Align DDR2 init with FSL bootlets source
> configs: mx28evk: Use single-line comments
> mx28evk: Disable CONFIG_CMD_I2C
> Add initial support for Wandboard dual lite and solo.
> mx28evk: Introduce a new target for saving env vars to NAND
> mx6qsabrelite: README: No need to pass 'u-boot.imx'
> mx6: Fix get_board_rev() for the mx6 solo case
> wandboard: Remove duplicate 'mmc dev'
> mx6qsabrelite: Remove duplicate 'mmc dev'
> wandboard: Remove CONFIG_SYS_FSL_USDHC_NUM
> mtd: nand: Introduce CONFIG_SYS_NAND_BUSWIDTH_16BIT
> mtd: nand: mxc_nand: Fix is_16bit_nand()
> mx31pdk: Remove watchdog support
>
> Gabe Black (3):
> Exynos: pwm: Fix two bugs in the exynos pwm configuration code
> Exynos: Avoid a divide by zero by specifying a non-zero period
> for pwm 4 Exynos: Tidy up the pwm_config function in the exynos pwm
> driver
>
> Hunter, Jon (4):
> omap2420-h4: Fix DRAM initialisation
> omap2420-h4: Fix booting from NOR flash
> omap2420-h4: Add device tree support
> omap2420-h4: Fix get_timer() and CONFIG_SYS_HZ
>
> Javier Martinez Canillas (1):
> i.MX6: mx6qsabrelite: README: don't pass chip-select to sf probe
> command
>
> Jon Hunter (5):
> omap5912-osk: Fix DRAM initialisation
> omap5912-osk: Fix booting from NOR flash
> omap5912-osk: Fix device initialisation
> omap5912-osk: Increase flash partition for u-boot
> omap5912-osk: Fix get_timer() and CONFIG_SYS_HZ
>
> Josh Wu (1):
> logo: update to the new logo for ATMEL
>
> Knut Wohlrab (1):
> imx-common: timer: fix 32-bit overflow
>
> Lars Poeschel (1):
> pcm051: Enable DDR PHY dynamic power down bit
>
> Lokesh Vutla (1):
> arm: omap4: Fix SDRAM AUTO DETECTION
>
> Lubomir Popov (2):
> OMAP: Fix copy-paste bug that did not enable UART4 clock
> OMAP4: Fix bug in omap4460_volts struct
>
> Manfred Huber (1):
> omap3_beagle: Flush UART3 xmit on enable if TEMT is broken
>
> Minkyu Kang (1):
> exynos: change indentation of defines in cpu.h
>
> Nishanth Menon (1):
> omap5: Allow use of a plain text env file
>
> Otavio Salvador (4):
> mx6qsabresd: Document the mapping of USDHC[2-4]
> mx6qsabresd: Fix card detection for invalid card id case
> mx6qsabre{sd,auto}: Add boot mode select
> mx23_olinuxino: Change definitions to use spaces instead of tabs
>
> Padmavathi Venna (4):
> Exynos: Add peripherial id for pwm
> Exynos: clock: Add generic api to get the clk freq
> Exynos: clock: Correct pwm source clk selection
> Exynos: pwm: Use generic api to get pwm clk freq
>
> Przemyslaw Marczak (1):
> spl:falcon:trats: Fix SPL image size computing.
>
> Rajeshwari Shinde (1):
> EXYNOS5: Add L2 Cache Support.
>
> SRICHARAN R (4):
> ARM: OMAP5: Rename omap5_evm to omap5_uevm
> ARM: OMAP5: Set fdt_high to enable booting with Device tree
> ARM: OMAP4/5: Change the default boot command to work with device
> tree ARM: OMAP4/5: Make bootz as the default boot command
>
> Simon Glass (1):
> Exynos: Change get_timer() to work correctly
>
> Stephen Warren (1):
> ARM: bcm2835: fix get_timer() to return ms
>
> Tom Rini (8):
> am335x: Enable MMC1 clock
> doc/feature-removal-schedule.txt: Add
> CONFIG_SYS_(CLOCKS|PADS)_ENABLE_ALL OMAP3/4/5/AM33xx: Correct logic for
> checking FAT or RAW MMC omap5_uevm.h: Move uEVM-specific choices to
> omap5_uevm.h omap5_common.h: Use fallback CONFIG_SYS_BAUDRATE_TABLE
> am335x/ti814x: Correct MMC_BOOT_DEVICES_START/END
> am335x: Update timings for the beaglebone again
> omap5_uevm: Correct to 2MiB aligned partitions on eMMC
>
> Vivek Gautam (2):
> SMDK5250: Fix compiler warning for non-dt systems
> spi: exynos: Fix compiler warnings for non-dt systems
>
> .gitignore | 3 +
> MAINTAINERS | 5 +-
> Makefile | 40 +-
> README | 42 +-
> arch/arm/config.mk | 2 -
> arch/arm/cpu/arm1136/config.mk | 7 +
> arch/arm/cpu/arm1136/omap24xx/timer.c | 8 +-
> arch/arm/cpu/arm1136/start.S | 28 +-
> arch/arm/cpu/arm1136/u-boot-spl.lds | 2 +-
> arch/arm/cpu/arm1176/bcm2835/timer.c | 14 +-
> arch/arm/cpu/arm1176/s3c64xx/config.mk | 34 -
> arch/arm/cpu/arm1176/s3c64xx/cpu_init.S | 135 ---
> arch/arm/cpu/arm1176/s3c64xx/init.c | 26 -
> arch/arm/cpu/arm1176/s3c64xx/reset.S | 34 -
> arch/arm/cpu/arm1176/s3c64xx/speed.c | 145 ----
> arch/arm/cpu/arm1176/s3c64xx/timer.c | 160 ----
> arch/arm/cpu/arm1176/start.S | 127 +--
> arch/arm/cpu/arm720t/start.S | 26 +-
> arch/arm/cpu/arm920t/ep93xx/u-boot.lds | 13 +-
> arch/arm/cpu/arm920t/start.S | 28 +-
> arch/arm/cpu/arm925t/start.S | 28 +-
> arch/arm/cpu/arm926ejs/config.mk | 8 +-
> arch/arm/cpu/arm926ejs/mxs/spl_mem_init.c | 18 +-
> arch/arm/cpu/arm926ejs/mxs/start.S | 4 +
> arch/arm/cpu/arm926ejs/mxs/u-boot-spl.lds | 6 +-
> arch/arm/cpu/arm926ejs/omap/timer.c | 15 +-
> arch/arm/cpu/arm926ejs/spear/u-boot-spl.lds | 6 +-
> arch/arm/cpu/arm926ejs/start.S | 40 +-
> arch/arm/cpu/arm946es/start.S | 28 +-
> arch/arm/cpu/arm_intcm/start.S | 30 +-
> arch/arm/cpu/armv7/am33xx/clock_am33xx.c | 5 +
> arch/arm/cpu/armv7/am33xx/elm.c | 2 +-
> arch/arm/cpu/armv7/config.mk | 6 +
> arch/arm/cpu/armv7/exynos/clock.c | 167 +++-
> arch/arm/cpu/armv7/exynos/soc.c | 36 +
> arch/arm/cpu/armv7/mx5/lowlevel_init.S | 8 +-
> arch/arm/cpu/armv7/mx6/soc.c | 12 +
> arch/arm/cpu/armv7/omap-common/clocks-common.c | 4 +-
> arch/arm/cpu/armv7/omap-common/emif-common.c | 29 +-
> arch/arm/cpu/armv7/omap-common/lowlevel_init.S | 10 +-
> arch/arm/cpu/armv7/omap-common/u-boot-spl.lds | 2 +-
> arch/arm/cpu/armv7/omap3/board.c | 31 +-
> arch/arm/cpu/armv7/omap4/emif.c | 1 -
> arch/arm/cpu/armv7/omap4/hw_data.c | 8 +-
> arch/arm/cpu/armv7/omap5/emif.c | 1 -
> arch/arm/cpu/armv7/s5p-common/pwm.c | 42 +-
> arch/arm/cpu/armv7/s5p-common/timer.c | 117 ++-
> arch/arm/cpu/armv7/socfpga/u-boot-spl.lds | 2 +-
> arch/arm/cpu/armv7/start.S | 26 +-
> arch/arm/cpu/ixp/start.S | 28 +-
> arch/arm/cpu/ixp/u-boot.lds | 2 +
> arch/arm/cpu/pxa/start.S | 26 +-
> arch/arm/cpu/s3c44b0/start.S | 28 +-
> arch/arm/cpu/sa1100/start.S | 28 +-
> arch/arm/cpu/u-boot-spl.lds | 19 +-
> arch/arm/cpu/u-boot.lds | 4 -
> arch/arm/dts/exynos5250.dtsi | 13 +
> arch/arm/imx-common/Makefile | 18 +
> .../arm/imx-common/cmd_hdmidet.c | 32 +-
> arch/arm/imx-common/timer.c | 26 +-
> arch/arm/include/asm/arch-am33xx/ddr_defs.h | 20 +-
> arch/arm/include/asm/arch-am33xx/omap_gpmc.h | 58 +-
> arch/arm/include/asm/arch-am33xx/spl.h | 8 +
> arch/arm/include/asm/arch-am33xx/sys_proto.h | 2 +-
> arch/arm/include/asm/arch-bcm2835/timer.h | 2 +
> arch/arm/include/asm/arch-exynos/clk.h | 15 +
> arch/arm/include/asm/arch-exynos/cpu.h | 10 +-
> arch/arm/include/asm/arch-exynos/dp_info.h | 1 -
> arch/arm/include/asm/arch-exynos/periph.h | 5 +
> arch/arm/include/asm/arch-mx6/mx6dl_pins.h | 3 +
> arch/arm/include/asm/arch-omap24xx/omap2420.h | 6 +-
> arch/arm/include/asm/arch-omap3/cpu.h | 6 +
> arch/arm/include/asm/arch-omap3/omap_gpmc.h | 68 +-
> arch/arm/include/asm/arch-omap3/spl.h | 3 +
> arch/arm/include/asm/arch-omap3/sys_proto.h | 2 +-
> arch/arm/include/asm/arch-omap4/omap.h | 1 -
> arch/arm/include/asm/arch-omap4/spl.h | 2 +
> arch/arm/include/asm/arch-omap5/omap.h | 1 -
> arch/arm/include/asm/arch-omap5/spl.h | 2 +
> arch/arm/include/asm/arch-s3c64xx/hardware.h | 63 --
> arch/arm/include/asm/arch-s3c64xx/s3c6400.h | 895
> --------------------
> arch/arm/include/asm/arch-s3c64xx/s3c64x0.h | 90 --
> arch/arm/include/asm/emif.h | 1 -
> arch/arm/include/asm/mach-types.h | 13 -
> arch/arm/include/asm/omap_gpmc.h | 87 ++
> arch/arm/lib/crt0.S | 52 +-
> board/actux1/u-boot.lds | 3 +
> board/actux2/u-boot.lds | 3 +
> board/actux3/u-boot.lds | 3 +
> board/ait/cam_enc_4xx/u-boot-spl.lds | 4 +-
> board/boundary/nitrogen6x/nitrogen6x.c | 8 +-
> board/davinci/da8xxevm/u-boot-spl-da850evm.lds | 4 +-
> board/davinci/da8xxevm/u-boot-spl-hawk.lds | 9 +-
> board/dvlhost/u-boot.lds | 3 +
> board/freescale/mx31ads/u-boot.lds | 18 +-
> board/freescale/mx31pdk/Makefile | 3 +
> board/freescale/mx31pdk/config.mk | 5 -
> board/freescale/mx31pdk/mx31pdk.c | 8 +
> board/freescale/mx53ard/mx53ard.c | 66 ++
> board/freescale/mx6qsabreauto/mx6qsabreauto.c | 18 +
> board/freescale/mx6qsabrelite/README | 4 +-
> board/freescale/mx6qsabrelite/mx6qsabrelite.c | 8 +-
> board/freescale/mx6qsabresd/mx6qsabresd.c | 48 +-
> board/isee/igep00x0/igep00x0.c | 2 +-
> board/karo/tx25/Makefile | 4 +-
> board/karo/tx25/config.mk | 5 -
> board/karo/tx25/tx25.c | 8 +
> board/overo/overo.c | 2 +-
> board/phytec/pcm051/board.c | 3 +-
> board/samsung/dts/exynos5250-smdk5250.dts | 40 +
> board/samsung/smdk5250/clock_init.c | 22 +-
> board/samsung/smdk5250/setup.h | 2 +-
> board/samsung/smdk5250/smdk5250-uboot-spl.lds | 4 +-
> board/samsung/smdk5250/smdk5250.c | 19 +-
> board/samsung/smdk6400/.gitignore | 5 -
> board/samsung/smdk6400/Makefile | 48 --
> board/samsung/smdk6400/config.mk | 30 -
> board/samsung/smdk6400/lowlevel_init.S | 323 -------
> board/samsung/smdk6400/smdk6400.c | 134 ---
> board/samsung/smdk6400/smdk6400_nand_spl.c | 37 -
> board/samsung/smdk6400/u-boot-nand.lds | 86 --
> board/samsung/trats/trats.c | 6 +-
> board/samsung/universal_c210/universal.c | 23 +-
> board/ti/am335x/board.c | 2 +-
> board/ti/omap2420h4/config.mk | 4 +-
> board/ti/omap2420h4/mem.c | 13 -
> board/ti/omap2420h4/omap2420h4.c | 24 +-
> board/ti/omap5912osk/config.mk | 12 +-
> board/ti/omap5912osk/lowlevel_init.S | 20 +
> board/ti/omap5912osk/omap5912osk.c | 23 +-
> board/ti/{omap5_evm => omap5_uevm}/Makefile | 0
> board/ti/{omap5_evm => omap5_uevm}/evm.c | 0
> board/ti/{omap5_evm => omap5_uevm}/mux_data.h | 0
> board/vpac270/u-boot-spl.lds | 6 +-
> board/wandboard/Makefile | 29 +
> board/wandboard/README | 40 +
> board/wandboard/wandboard.c | 178 ++++
> boards.cfg | 9 +-
> common/hash.c | 18 +
> config.mk | 7 +
> doc/README.arm-relocation | 14 +-
> doc/README.mx28evk | 18 +
> doc/README.omap3 | 28 +
> doc/README.scrapyard | 1 +
> doc/device-tree-bindings/video/exynos-dp.txt | 69 ++
> doc/device-tree-bindings/video/exynos-fb.txt | 92 ++
> doc/driver-model/UDM-serial.txt | 42 +-
> doc/feature-removal-schedule.txt | 32
> +- .../arm1176/s3c64xx => drivers/crypto}/Makefile | 27 +-
> drivers/crypto/ace_sha.c | 126 +++
> drivers/crypto/ace_sha.h | 325 +++++++
> drivers/mmc/bcm2835_sdhci.c | 5 +-
> drivers/mmc/fsl_esdhc.c | 7 +
> drivers/mtd/nand/Makefile | 2 +-
> drivers/mtd/nand/mxc_nand.c | 260 +++---
> drivers/mtd/nand/mxc_nand.h | 225
> +++++ .../mtd/nand/mxc_nand_spl.c | 130 ++-
> drivers/mtd/nand/ndfc.c | 4 +-
> drivers/mtd/nand/omap_gpmc.c | 424 +++++++---
> drivers/mtd/nand/s3c64xx.c | 295 -------
> drivers/mtd/onenand/onenand_base.c | 4 -
> drivers/mtd/onenand/samsung.c | 60 +-
> drivers/serial/Makefile | 1 -
> drivers/serial/ns16550.c | 18 +-
> drivers/serial/s3c64xx.c | 187 ----
> drivers/serial/serial.c | 2 -
> drivers/spi/exynos_spi.c | 2 +
> drivers/spi/mxc_spi.c | 8 +-
> drivers/usb/host/Makefile | 1 -
> drivers/usb/host/ohci-hcd.c | 1 -
> drivers/usb/musb-new/musb_core.c | 7 +
> drivers/usb/musb-new/musb_uboot.c | 2 +-
> drivers/video/exynos_dp.c | 76 +-
> drivers/video/exynos_dp_lowlevel.c | 69 +-
> drivers/video/exynos_dp_lowlevel.h | 1 +
> drivers/video/exynos_fb.c | 230 ++++-
> drivers/video/exynos_fimd.c | 44 +-
> include/common.h | 7 +-
> include/config_fallbacks.h | 16 +
> include/configs/MPC8313ERDB.h | 2 +-
> include/configs/am335x_evm.h | 1 +
> include/configs/cam_enc_4xx.h | 4 +-
> include/configs/da850evm.h | 4 +-
> include/configs/dra7xx_evm.h | 2 +
> include/configs/exynos5250-dt.h | 11 +-
> include/configs/igep00x0.h | 3 -
> include/configs/mx23_olinuxino.h | 162 ++--
> include/configs/mx25pdk.h | 4 +
> include/configs/mx28evk.h | 92 +-
> include/configs/mx31pdk.h | 23 +-
> include/configs/mx53ard.h | 10 +
> include/configs/mx6qsabre_common.h | 2 +
> include/configs/mx6qsabrelite.h | 3 -
> include/configs/omap2420h4.h | 5 +-
> include/configs/omap4_common.h | 22 +-
> include/configs/omap5912osk.h | 15 +-
> include/configs/omap5_common.h | 51 +-
> include/configs/{omap5_evm.h => omap5_uevm.h} | 17 +
> include/configs/rpi_b.h | 2 +-
> include/configs/smdk6400.h | 296 -------
> include/configs/trats.h | 1 +
> include/configs/tricorder.h | 13 +-
> include/configs/tx25.h | 22 +-
> include/configs/wandboard.h | 209 +++++
> include/fdtdec.h | 2 +
> include/fsl_esdhc.h | 1 +
> include/fsl_nfc.h | 170 ----
> include/hw_sha.h | 50 ++
> include/lcd.h | 9 -
> include/onenand_uboot.h | 4 -
> lib/Makefile | 2 +-
> lib/fdtdec.c | 2 +
> mkconfig | 9 -
> nand_spl/board/freescale/mx31pdk/Makefile | 63 --
> nand_spl/board/freescale/mx31pdk/u-boot.lds | 87 --
> nand_spl/board/karo/tx25/Makefile | 84 --
> nand_spl/board/karo/tx25/config.mk | 1 -
> nand_spl/board/karo/tx25/u-boot.lds | 85 --
> nand_spl/board/samsung/smdk6400/Makefile | 117 ---
> nand_spl/board/samsung/smdk6400/config.mk | 40 -
> nand_spl/board/samsung/smdk6400/u-boot.lds | 80 --
> tools/logos/atmel.bmp | Bin 26334 ->
> 15478 bytes tools/scripts/define2mk.sed | 2
> + 223 files changed, 3941 insertions(+), 5319 deletions(-) delete mode
> 100644 arch/arm/cpu/arm1176/s3c64xx/config.mk delete mode 100644
> arch/arm/cpu/arm1176/s3c64xx/cpu_init.S delete mode 100644
> arch/arm/cpu/arm1176/s3c64xx/init.c delete mode 100644
> arch/arm/cpu/arm1176/s3c64xx/reset.S delete mode 100644
> arch/arm/cpu/arm1176/s3c64xx/speed.c delete mode 100644
> arch/arm/cpu/arm1176/s3c64xx/timer.c rename
> drivers/usb/host/s3c64xx-hcd.c => arch/arm/imx-common/cmd_hdmidet.c
> (65%) delete mode 100644 arch/arm/include/asm/arch-s3c64xx/hardware.h
> delete mode 100644 arch/arm/include/asm/arch-s3c64xx/s3c6400.h delete
> mode 100644 arch/arm/include/asm/arch-s3c64xx/s3c64x0.h create mode
> 100644 arch/arm/include/asm/omap_gpmc.h delete mode 100644
> board/freescale/mx31pdk/config.mk delete mode 100644
> board/karo/tx25/config.mk delete mode 100644
> board/samsung/smdk6400/.gitignore delete mode 100644
> board/samsung/smdk6400/Makefile delete mode 100644
> board/samsung/smdk6400/config.mk delete mode 100644
> board/samsung/smdk6400/lowlevel_init.S delete mode 100644
> board/samsung/smdk6400/smdk6400.c delete mode 100644
> board/samsung/smdk6400/smdk6400_nand_spl.c delete mode 100644
> board/samsung/smdk6400/u-boot-nand.lds rename board/ti/{omap5_evm =>
> omap5_uevm}/Makefile (100%) rename board/ti/{omap5_evm =>
> omap5_uevm}/evm.c (100%) rename board/ti/{omap5_evm =>
> omap5_uevm}/mux_data.h (100%) create mode 100644
> board/wandboard/Makefile create mode 100644 board/wandboard/README
> create mode 100644 board/wandboard/wandboard.c
> create mode 100644 doc/device-tree-bindings/video/exynos-dp.txt
> create mode 100644 doc/device-tree-bindings/video/exynos-fb.txt
> rename {arch/arm/cpu/arm1176/s3c64xx => drivers/crypto}/Makefile (69%)
> create mode 100644 drivers/crypto/ace_sha.c
> create mode 100644 drivers/crypto/ace_sha.h
> create mode 100644 drivers/mtd/nand/mxc_nand.h
> rename nand_spl/nand_boot_fsl_nfc.c => drivers/mtd/nand/mxc_nand_spl.c
> (65%) delete mode 100644 drivers/mtd/nand/s3c64xx.c
> delete mode 100644 drivers/serial/s3c64xx.c
> rename include/configs/{omap5_evm.h => omap5_uevm.h} (71%)
> delete mode 100644 include/configs/smdk6400.h
> create mode 100644 include/configs/wandboard.h
> delete mode 100644 include/fsl_nfc.h
> create mode 100644 include/hw_sha.h
> delete mode 100644 nand_spl/board/freescale/mx31pdk/Makefile
> delete mode 100644 nand_spl/board/freescale/mx31pdk/u-boot.lds
> delete mode 100644 nand_spl/board/karo/tx25/Makefile
> delete mode 100644 nand_spl/board/karo/tx25/config.mk
> delete mode 100644 nand_spl/board/karo/tx25/u-boot.lds
> delete mode 100644 nand_spl/board/samsung/smdk6400/Makefile
> delete mode 100644 nand_spl/board/samsung/smdk6400/config.mk
> delete mode 100644 nand_spl/board/samsung/smdk6400/u-boot.lds
>
> Amicalement,
> --
> Albert.
> _______________________________________________
> U-Boot mailing list
> U-Boot@lists.denx.de
> http://lists.denx.de/mailman/listinfo/u-boot
>
You have forgotten to apply this one:
http://patchwork.ozlabs.org/patch/233964/
Best regards,
Benoît
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
