When swi instruction is executed, it is expected to get message
"software interrupt" in console and dump registers and reboot, as
do_software_interrupt() in arch/arm/lib/interrupts.c.
But, actually it causes data abort accessing wrong address in get_bad_stack_swi
macro in arch/arm/cpu/v7/start.S.
This patch fixes this problem.
The same mistake in arch/arm/cpu/{arm1136,arm1176,pxa}/start.S.
Signed-off-by: Tetsuyuki Kobayashi <k...@kmckk.co.jp>
---
Changes for v2:
- added arch/arm/cpu/{arm1136,arm1176,pxa}/start.S
(But not tested, because I don't have test boards of them)
arm/arm/cpu/armv7/start.S is tested on KZM-A9-GT board.
arch/arm/cpu/arm1136/start.S | 2 +-
arch/arm/cpu/arm1176/start.S | 2 +-
arch/arm/cpu/armv7/start.S | 2 +-
arch/arm/cpu/pxa/start.S | 2 +-
4 files changed, 4 insertions(+), 4 deletions(-)
diff --git a/arch/arm/cpu/arm1136/start.S b/arch/arm/cpu/arm1136/start.S
index eba2324..7b9db2b 100644
--- a/arch/arm/cpu/arm1136/start.S
+++ b/arch/arm/cpu/arm1136/start.S
@@ -392,7 +392,7 @@ cpu_init_crit:
str r0, [r13] @ save R0's value.
ldr r0, IRQ_STACK_START_IN @ get data regions start
str lr, [r0] @ save caller lr in position 0
of saved stack
- mrs r0, spsr @ get the spsr
+ mrs lr, spsr @ get the spsr
str lr, [r0, #4] @ save spsr in position 1 of
saved stack
ldr r0, [r13] @ restore r0
add r13, r13, #4 @ pop stack entry
diff --git a/arch/arm/cpu/arm1176/start.S b/arch/arm/cpu/arm1176/start.S
index 3c291fb..8534fb8 100644
--- a/arch/arm/cpu/arm1176/start.S
+++ b/arch/arm/cpu/arm1176/start.S
@@ -480,7 +480,7 @@ phy_last_jump:
/* save caller lr in position 0 of saved stack */
str lr, [r0]
/* get the spsr */
- mrs r0, spsr
+ mrs lr, spsr
/* save spsr in position 1 of saved stack */
str lr, [r0, #4]
/* restore r0 */
diff --git a/arch/arm/cpu/armv7/start.S b/arch/arm/cpu/armv7/start.S
index 36a4c3c..9bf950b 100644
--- a/arch/arm/cpu/armv7/start.S
+++ b/arch/arm/cpu/armv7/start.S
@@ -465,7 +465,7 @@ ENDPROC(cpu_init_crit)
@ spots for abort stack
str lr, [r0] @ save caller lr in position 0
@ of saved stack
- mrs r0, spsr @ get the spsr
+ mrs lr, spsr @ get the spsr
str lr, [r0, #4] @ save spsr in position 1 of
@ saved stack
ldr r0, [r13] @ restore r0
diff --git a/arch/arm/cpu/pxa/start.S b/arch/arm/cpu/pxa/start.S
index 456a783..18131bb 100644
--- a/arch/arm/cpu/pxa/start.S
+++ b/arch/arm/cpu/pxa/start.S
@@ -387,7 +387,7 @@ cpu_init_crit:
str r0, [r13] @ save R0's value.
ldr r0, IRQ_STACK_START_IN @ get data regions start
str lr, [r0] @ save caller lr in position 0
of saved stack
- mrs r0, spsr @ get the spsr
+ mrs lr, spsr @ get the spsr
str lr, [r0, #4] @ save spsr in position 1 of
saved stack
ldr r0, [r13] @ restore r0
add r13, r13, #4 @ pop stack entry
--
1.7.9.5
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
