The purpose of .globl is to export symbols for ld, not to declare external symbols.
By the way, use the ENTRY() and ENDPROC() macros to define functions rather than using .global directly. Signed-off-by: Benoît Thébaudeau <benoit.thebaud...@advansee.com> --- Changes in v10: - Rebase on current u-boot-arm/master. Changes in v9: None Changes in v8: - Use ENTRY() and ENDPROC() to define functions. Changes in v7: None Changes in v6: - New patch. Changes in v5: None Changes in v4: None Changes in v3: None Changes in v2: None arch/arm/lib/crt0.S | 28 ++++------------------------ 1 file changed, 4 insertions(+), 24 deletions(-) diff --git a/arch/arm/lib/crt0.S b/arch/arm/lib/crt0.S index 37d9927..1524f7e 100644 --- a/arch/arm/lib/crt0.S +++ b/arch/arm/lib/crt0.S @@ -24,6 +24,7 @@ #include <config.h> #include <asm-offsets.h> +#include <linux/linkage.h> /* * This file handles the target-independent stages of the U-Boot @@ -67,33 +68,10 @@ */ /* - * declare nand_boot() or board_init_r() to jump to at end of crt0 - */ - -#if defined(CONFIG_NAND_SPL) - -.globl nand_boot - -#elif ! defined(CONFIG_SPL_BUILD) - -.globl board_init_r - -#endif - -/* - * start and end of BSS - */ - -.globl __bss_start -.globl __bss_end - -/* * entry point of crt0 sequence */ -.global _main - -_main: +ENTRY(_main) /* * Set up initial C runtime environment and call board_init_f(0). @@ -171,3 +149,5 @@ clbss_l:cmp r0, r1 /* while not at end of BSS */ /* we should not return here. */ #endif + +ENDPROC(_main) -- 1.7.10.4 _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot