So with OMAP added to multi platform kernel,
the uImage no more contains a valid load address.
With the uboot already supporting zImage,
change the default boot command to bootz
instead.
Acked-by: Nishanth Menon <n...@ti.com>
Signed-off-by: Sricharan R <r.sricha...@ti.com>
Tested-by: Nishanth Menon <n...@ti.com>
---
include/configs/omap4_common.h | 4 ++--
include/configs/omap5_common.h | 4 ++--
2 files changed, 4 insertions(+), 4 deletions(-)
diff --git a/include/configs/omap4_common.h b/include/configs/omap4_common.h
index 18cd98f..5ad606e 100644
--- a/include/configs/omap4_common.h
+++ b/include/configs/omap4_common.h
@@ -152,7 +152,7 @@
"fdtaddr=0x80f80000\0" \
"bootpart=0:1\0" \
"bootdir=\0" \
- "bootfile=uImage\0" \
+ "bootfile=zImage\0" \
"usbtty=cdc_acm\0" \
"vram=16M\0" \
"mmcdev=0\0" \
@@ -171,7 +171,7 @@
"loadimage=load mmc ${bootpart} ${loadaddr} ${bootdir}/${bootfile}\0" \
"mmcboot=echo Booting from mmc${mmcdev} ...; " \
"run mmcargs; " \
- "bootm ${loadaddr} - ${fdtaddr}\0" \
+ "bootz ${loadaddr} - ${fdtaddr}\0" \
"findfdt="\
"if test $board_name = sdp4430; then " \
"setenv fdtfile omap4-sdp.dtb; fi; " \
diff --git a/include/configs/omap5_common.h b/include/configs/omap5_common.h
index 24c9ecc..44c35b1 100644
--- a/include/configs/omap5_common.h
+++ b/include/configs/omap5_common.h
@@ -151,7 +151,7 @@
"fdtaddr=0x80f80000\0" \
"bootpart=0:1\0" \
"bootdir=\0" \
- "bootfile=uImage\0" \
+ "bootfile=zImage\0" \
"usbtty=cdc_acm\0" \
"vram=16M\0" \
"mmcdev=0\0" \
@@ -170,7 +170,7 @@
"loadimage=load mmc ${bootpart} ${loadaddr} ${bootdir}/${bootfile}\0" \
"mmcboot=echo Booting from mmc${mmcdev} ...; " \
"run mmcargs; " \
- "bootm ${loadaddr} - ${fdtaddr}\0" \
+ "bootz ${loadaddr} - ${fdtaddr}\0" \
"findfdt="\
"if test $board_name = omap5_uevm; then " \
"setenv fdtfile omap5-uevm.dtb; fi;\0 " \
--
1.7.9.5
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
