On 03/27/2013 10:36 AM, Fabio Estevam wrote:
When booting a Freescale kernel 3.0.35 on a Wandboard solo, the get_board_rev()
returns 0x62xxx, which is not a value understood by the VPU
(Video Processing Unit) library in the kernel and causes the video playback to
fail.
The expected values for get_board_rev are:
0x63xxx: For mx6quad/dual
0x61xxx: For mx6dual-lite/solo
So adjust get_board_rev() accordingly and make it as weak function, so that we
do not need to define it in every mx6 board file.
Signed-off-by: Fabio Estevam <fabio.este...@freescale.com>
---
Changes since v1:
- Avoid extra call to get_cpu_rev()
arch/arm/cpu/armv7/mx6/soc.c | 12 ++++++++++++
board/boundary/nitrogen6x/nitrogen6x.c | 5 -----
board/freescale/mx6qsabrelite/mx6qsabrelite.c | 5 -----
board/freescale/mx6qsabresd/mx6qsabresd.c | 5 -----
board/wandboard/wandboard.c | 5 -----
5 files changed, 12 insertions(+), 20 deletions(-)
Acked-by: Eric Nelson <eric.nel...@boundarydevices.com>
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
