E Robertson wrote: > Hi all, > In the current git source, I have the serverip config set but tftp > complains about serverip not being set. > I didn't see any changes to the source here. Am I missing something? > >> printenv > baudrate=115200 > ipaddr=192.168.0.200 > serverip=192.168.0.100 > gatewayip=192.168.0.1 > netmask=255.255.255.0 > hostname="Vincy" > ethaddr=00:07:A6:00:6A:E6 > bootdelay=5 > bootargs= > bootcmd= > ethact=macb0 > > Environment size: 247/16380 bytes > OmniTouch> tftp > link up, 100Mbps full-duplex (lpa: 0x41e1) > *** ERROR: `serverip' not set
What is "serverip" set *after* running "tftp"? Is the "tftp" command trashing serverip? Is "tftp" doing a DHCP/BOOTP operation to your DHCP server and getting an invalid server IP? Disclaimer: I don't know off-hand if tftpboot does a DHCP operation. I get confused by the bootp, dhcp, and tftpboot commands - they are all the same but different. Best regards, gvb _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
