hello, my board base on 9m10g45, but mine don't work. version ---- 2013
lastest . Would you please tell me why?? I will appreciate your reply.
message below:
-- AT91bootstrap Project 3.0 --
-- AT91SAM9G45-EK
-- Compiled: Mar 5 2013 18:10:43 --
-I- Setting: MCK = 133MHz
-I- Init DDRAM
-I- Init NAND Flash
-I- Nandflash ID is 0x9500F1EC
-I- Nandflash driver initialized
-I- Size of the whole device in bytes : 0x8000000
-I- Size in bytes of one single block of a device : 0x20000
-I- Number of blocks in the entire device : 0x400
-I- Size of the data area of a page in bytes : 0x800
-I- Number of pages in the entire device : 0x40
-I- Bus width : 8
-I- Copy "" (196608 bytes) from NAND 0x00020000 to 0x73f00000
-I- Jump to 0x73f00000
CPU die there !!
Best regards
Terry.Xie
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
