This changes the code so in case an unkown value is passed it will
return as invalid.
Signed-off-by: Otavio Salvador <ota...@ossystems.com.br>
---
Changes in v5: None
Changes in v4:
- Fix switch code to proper break (Stefano)
Changes in v3: None
Changes in v2:
- Rework code to use a 'ret' variable (Fabio)
board/freescale/mx6qsabresd/mx6qsabresd.c | 14 ++++++++++----
1 file changed, 10 insertions(+), 4 deletions(-)
diff --git a/board/freescale/mx6qsabresd/mx6qsabresd.c
b/board/freescale/mx6qsabresd/mx6qsabresd.c
index 5ebbff3..d3019e9 100644
--- a/board/freescale/mx6qsabresd/mx6qsabresd.c
+++ b/board/freescale/mx6qsabresd/mx6qsabresd.c
@@ -145,15 +145,21 @@ struct fsl_esdhc_cfg usdhc_cfg[3] = {
int board_mmc_getcd(struct mmc *mmc)
{
struct fsl_esdhc_cfg *cfg = (struct fsl_esdhc_cfg *)mmc->priv;
+ int ret = 0;
switch (cfg->esdhc_base) {
case USDHC2_BASE_ADDR:
- return !gpio_get_value(USDHC2_CD_GPIO);
+ ret = !gpio_get_value(USDHC2_CD_GPIO);
+ break;
case USDHC3_BASE_ADDR:
- return !gpio_get_value(USDHC3_CD_GPIO);
- default:
- return 1; /* eMMC/uSDHC4 is always present */
+ ret = !gpio_get_value(USDHC3_CD_GPIO);
+ break;
+ case USDHC4_BASE_ADDR:
+ ret = 1; /* eMMC/uSDHC4 is always present */
+ break;
}
+
+ return ret;
}
int board_mmc_init(bd_t *bis)
--
1.8.1
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
