Fix the following build error when buildig nitrogen6s1g:
nitrogen6x.c:89:17: error: 'CONFIG_DDR_MB' undeclared (first use in
this function)
nitrogen6x.c:89:17: note: each undeclared identifier is reported only
once for each function it appears in
Reported-by: Albert Aribaud <albert.u.b...@aribaud.net>
Signed-off-by: Fabio Estevam <fabio.este...@freescale.com>
---
Changes since v3:
- No changes
Changes since v2:
- No changes
Changes since v1:
- Rebased against u-boot-imx tree
boards.cfg | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/boards.cfg b/boards.cfg
index fb3b197..84f96e0 100644
--- a/boards.cfg
+++ b/boards.cfg
@@ -260,7 +260,7 @@ nitrogen6dl2g arm armv7
nitrogen6x boundar
nitrogen6q arm armv7 nitrogen6x
boundary mx6
nitrogen6x:IMX_CONFIG=board/boundary/nitrogen6x/nitrogen6q.cfg,MX6Q,DDR_MB=1024
nitrogen6q2g arm armv7 nitrogen6x
boundary mx6
nitrogen6x:IMX_CONFIG=board/boundary/nitrogen6x/nitrogen6q2g.cfg,MX6Q,DDR_MB=2048
nitrogen6s arm armv7 nitrogen6x
boundary mx6
nitrogen6x:IMX_CONFIG=board/boundary/nitrogen6x/nitrogen6s.cfg,MX6S,DDR_MB=512
-nitrogen6s1g arm armv7 nitrogen6x
boundary mx6
nitrogen6x:IMX_CONFIG=board/boundary/nitrogen6x/nitrogen6s1g.cfg,MX6S,SDRAM_MB=1024
+nitrogen6s1g arm armv7 nitrogen6x
boundary mx6
nitrogen6x:IMX_CONFIG=board/boundary/nitrogen6x/nitrogen6s1g.cfg,MX6S,DDR_MB=1024
cm_t35 arm armv7 cm_t35 -
omap3
omap3_overo arm armv7 overo -
omap3
omap3_pandora arm armv7 pandora -
omap3
--
1.7.9.5
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
