Dear Fabio Estevam, > From: Fabio Estevam <fabio.este...@freescale.com> > > Currently the following kernel hang happens when loading a 2.6.35 kernel > from Freeescale on a mx28evk board: > > RPC: Registered tcp transport module. > RPC: Registered tcp NFSv4.1 backchannel transport module. > Bus freq driver module loaded > IMX usb wakeup probe > usb h1 wakeup device is registered > mxs_cpu_init: cpufreq init finished > ... > > Loading the same kernel using the bootlets from the > imx-bootlets-src-10.12.01 package, the hang does not occur. > > Comparing the DDR2 initialization from the bootlets code against the U-boot > one, we can notice some mismatches, and after applying the same > initialization into U-boot the 2.6.35 kernel can boot normally. > > Also tested with 'mtest' command, which runs succesfully. > > Signed-off-by: Fabio Estevam <fabio.este...@freescale.com>
On M28EVK: Tested-by: Marek Vasut <ma...@denx.de> Best regards, Marek Vasut _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
