On 3/10/2013 11:55 PM, Andreas Bießmann wrote:
Hi, Andreas
Dear Josh Wu,
On 22.02.2013 11:36, Josh Wu wrote:
Hi, Bo Shen
Sorry for the late reply. I am taken over by other stuff. check my
comments below.
On 1/23/2013 5:31 PM, Bo Shen wrote:
Hi Josh,
On 01/22/2013 04:36 PM, Josh Wu wrote:
This patch will save U-Boot environment as a file: uboot.env, in FAT
partition
instead of saving it in raw sector of SD card.
Since saving environment in raw sector has risk of corrupting the SD
card and
only can use very small size.
Save as a FAT file has no above limitation.
Signed-off-by: Josh Wu<josh...@atmel.com>
---
this patch is based on v2013.01.
include/configs/at91sam9x5ek.h | 12 +++++++-----
1 file changed, 7 insertions(+), 5 deletions(-)
When I test this on at91sam9g35ek board, execute "saveenv", it will
report following information, any information for this?
I also tested some sd card, and I meet this issue you met too.
In such situation, the command "mmc part" will report a unknow
partition error.
I suspect the issue is caused by either mmc driver or FAT partition part
of code.
And I will continue digging this issue. Thanks for report the errors.
Have you an updated version of this patch?
Sorry, I didn't follow up this issue yet. So no update so far. I will
continue work on it when I have time.
Best Regards,
Josh Wu
Best regards
Andreas Bießmann
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
